Top 20 2005 Kia Sorento LX Questions & Answers

Scan Tools The Changing Field of Diagnostics You take it to a Certified A/C repair shop if you have to ask .

a job for an ac specialist shop and not for DIY it is in the gas pipe at the evaporator and will require a loss of gas during the fix

you need a OBD scanner to reset air bag lites

Hi, You can find it on the exhaust manifold side of the engine. So find the exhaust manifold and down on the engine block the filter should be. It is usually round and cylindrical. Good luck

check the fuses

If the reservoir is not on the clutch master cylinder then check for a line to the brake master cylinder reservoir as some units use a second reservoir in the brake master cylinder reservoir.

Depends. The cylinder goes inside the housing on most cars if the cylinder can be obtained seperately. The cylinder is the part the key goes into.

the wearing on the tire is a separate problem i would assume it would be the wheel bearing/hub assembly those can go bad simply by hitting a pothole to hard why it wouldn't start is beyond me

with an oscilloscope or dealer only scan tool.

These are codes for misfires on #1,#2, and random cylinders.A cylinder will also misfire from the injectors as well as the spark side. If this is a v-6, check for camshaft position sensors.

Could also be an injector or vac leak.The code means the cylinder did not fire and there was a drop in RPM not that the spark plug did not actually fire.

pull # 1 spark plug. turn to crank timing mark , insert screw driver in hole if goes in deep and doesnt hit piston, turn to mark again this is top dead center if marks dont line up with piston movement timing has jumped.

In the link and a video as well. NOTE: they are POUND INCH not Foot Pounds.

Torque Pattern for Valve Cover? - Kia Forum

kia-forums.com https://www.kia-forums.com > threads > torque-patter... Sep 17, 2013 - show the locations of the bolts on the "Cylinder Head Cover" --aka valve cover-- and they provide the torque at 35-52 lb-in (4-6Nm), but they ... Valve Cover Gasket help Apr 28, 2012 Torque specs and sequence for intake bolts Jul 10, 2022 Need Bolt Pattern for Valve Cover, please help? May 15, 2018 torque specs? Mar 20, 2017 More results from www.kia-forums.com ..

order parts remove door panel and replace parts

https://eautorepair.net/Marketing/Default.asp pay and read,

Question edited for clarity and typo. some help in the link. https://www.google.com/search?q=2016+Kia+Sorento.+4WD+actuator+replacement ..

Set the blower control on high with max a/c then try to tap on the blower motor and if it run or starts and stops replace the motor.

https://www.obd-codes.com/p0016 https://www.obd-codes.com/p0018 these two links should help fix your problem

should be on the shifter ----check with your owners manual

It can only be a few things Gail. Fuse is the first thing to check. Then check the switch for power and continuity. You have changed the resistor, so we assume the new resistor is good. The only thing left is the blower motor itself. Remove it and add 12 volts to it.