20 Most Recent 2007 Dacia Logan 1.6 - Page 5 Questions & Answers

The transmission control module is inside of the PCM which is located

There's a clever workaround to open the rear hatch without resorting to breaking windows or costly repairs. Here's how: Interior Tailgate Panel Access: Gently pull back the interior tailgate panel right above the bump in the middle where the latch is located. There are no screws or bolts in that area, so it should pull away about 2 inches. Once you've created enough space, you'll need to reach in and push down the release bar. Unlocking the Glass: Feel around for the part that needs to be pushed down. When you successfully push it down, the glass will be unlocked. Opening the Glass and Tailgate: Now that the glass is unlocked, both the glass and the tailgate can be opened. If you want to leave the interior tailgate panel off temporarily, you can just push the manual release lever whenever needed. Remember, this method allows you to access the rear hatch without damaging the tailgate panel or ripping out the carpet. Rear Hatch Release/Lock Failure: How To Open The Glass ' S-10 Forum (s10forum.com)

You bought a truck with no keys? Aren't you worried it was stolen? Auto locksmith will get you in, make two keys based on the VIN Number and program them to the antitheft system and engine immobilizer. https://www.google.com/search?q=auto+locksmith+near+me ..

Hi MikeJust tidying up old questions. Did you manage to get opacesz fo bulb change from out side reaf door?And take off the 2 size 7. Mill. Screws but couldent get any fhing to gfab?https://www.google.com/search?q=led+license+plate+light+assembly..

But is there more than one range sensor? https://www.google.com/search?q=Scania+G+460+range+gear+sensor+problems ..

Not sure about a Carla, but most backs just pull straight up.

There isn't one. If you have power going from the fuel pump relay to the motor and the motor doesn't run, change the fuel sending module in the tank

Based on years of experience use the bolt size as a guide ie 10mm 25 to 35 foot pounds torque. Gasket material also determines torque value. You need to specify what size bolts/studs you have

More information please. What does this serial number come from? What does the authorisation code unlock?

For the dashboard check you fuses. Sometimes it is that easy. You will need to repair the dashboard lights to find out if there are any warning lights showing. We're there any warning lights before the dashboard lights stopped working? What exactly does it do when you crank the engine? Just crank? Crank, try then stall? Have you had it plugged into a diagnostic scanner to check if it's a faulty sensor?

If the ignition switch fails while in the "on" position, the vehicle may start but then immediately stall. This could be due to a momentary power supply issue to the fuel pump and ignition system during cranking. It is the properly working ignition switch that sends the power to the starter and onward. Chevy Trailblazer Bad Ignition Switch: Symptoms, Causes, + How to Fix ' Drivetrain Resource (700r4transmissionhq.com) 6 Symptoms Of A Bad Ignition Switch and Replacement Cost (mechanicbase.com) Sometimes, a bad ignition switch results in a silent starter motor. In this case, the starter motor doesn't make any noise when you turn the key. It could be due to insufficient power supply to the starter motor.

You have a leak somewhere on your system .

Yes, it can raise engine temperature. And heavy traffic adds to the strain on the engine, also impacting heat. The reason the temperature is normal at high speed is that then there is more airflow through the radiator helping dissipate heat. A/C inspection, Cooling System check, and Thermostat check by professionals are recommended to find the cause. I'd check what an A/C repair/replacement would cost in case that turns out to be the problem. If the coolant is low because of a leak, no use getting it recharged before the leak is fixed.

1. Turn off the machine and unplug it for safety.
2. Locate the Angle Indicator Plate near the main shaft.
3. Align the plate correctly according to the machine's specifications.
4. Tighten any screws or fasteners securing the plate in place.
5. Ensure the plate is firmly attached and doesn't wobble.
6. Power on the machine and check if the plate remains in position during operation.
7. If needed, make further adjustments or seek professional assistance.

I would use my OBD tool to switch the actuator on and off whilst monitoring power lines to and from the actuator. It will most likely be a broken wire or corroded connector.

Key fob or hatch lever near the symbol on the hatch door. You didn't indicate a particular problem but here are some videos that address a variety of situations: 2007 Chevy Uplander - Fix and Maintain those Power Sliding Doors (youtube.com) 2007 Chev Uplander Door Lock Repair - Doors won't Lock (youtube.com) This Is CLE (youtube.com) SOLVED: Chevy uplander rear liftgate will not unlock - 2005 Chevrolet Uplander ' Fixya

potential causes and steps to address this issue: Electrical Modules Issues: The flashing lights could be related to issues with the vehicle's electrical modules. These modules control various functions, including lighting. To diagnose this, I recommend seeking assistance from an auto-electrician who has access to a professional-grade scan tool computer. They can collect data from each module and identify which ones are causing the issue. Common culprits might include the Engine Control Module (ECM) and the Body Control Module (BCM). Security System Reset: Sometimes, disconnecting the battery can cause the vehicle's security system to lose its memory. This might lead to unexpected behavior. To reset the system, follow these steps: Maintain power to the car: When changing the battery, use a charger or connect wires to the old battery to prevent power loss. Refer to the reset procedure: You can find detailed instructions in this link or by searching for "2007 Chevy Uplander security reset" online. Wiring Schematics and Ignition Switch: If the issue persists, consider checking the wiring schematic for the ignition switch, steering column, and dashboard. Understanding the electrical connections can help pinpoint the problem. You can find wiring diagrams for the instrument panel here and additional diagrams here. SOLVED: In my 2006 Chevrolet Uplander the instrument - Chevrolet ' Fixya All Wiring Diagrams for Chevrolet Uplander LS 2007 - Wiring diagrams for cars (portal-diagnostov.com)

Check Flash Settings: Ensure that the flash is enabled in your camera settings. Look for a flash icon (usually a lightning bolt symbol) on the camera's display or menu. If it's set to "off," switch it to "auto" or "on" mode. Battery Level: Make sure your camera's batteries are sufficiently charged. Low battery levels can affect flash performance. If using rechargeable batteries, ensure they are fully charged. Test Different Modes: Try capturing photos in different modes (e.g., Auto, Program, or Manual). Some modes may have specific flash behavior. Experiment to see if the flash works in any of them. Check Flash Bulb: Inspect the flash bulb (the small light source) for any damage or debris. Clean the bulb gently with a soft cloth if needed. Reset Camera Settings: Sometimes settings can get stuck. Reset your camera to its default settings. Refer to your camera's user manual for instructions on how to perform a factory reset. Test in Different Lighting Conditions: Try using the flash in various lighting scenarios (bright, low light, indoors, outdoors). The flash may not activate if there's enough ambient light. Check for Obstructions: Ensure there are no obstructions (such as fingers or objects) blocking the flash. Clean the flash area to remove any dirt or dust. Update Firmware (if applicable): Check if there are any firmware updates available for your camera model. Visit Acer's official website for any available updates. External Flash (Optional): If the built-in flash still doesn't work, consider using an external flash (if compatible with your camera). External flashes provide more power and flexibility. Professional Service: If none of the above steps resolve the issue, it's advisable to seek professional camera repair. Contact Acer's customer support or visit an authorized service center.

Year make and model of the vehicle please? You posted to Cars and Trucks, and what is this star you speak of? All vehicle questions need 'year make model' first 3 words. All others need 'make model (what it is)' first 3 words. Then you have 10,000 categories to choose from. Write the post, proof read, put in the right category and post. ..

nothing to do with fixya site contact the seller direct