20 Most Recent
2006 Chrysler 300 Touring Questions & Answers
How do you remove Idler pulley?
usually fastened to motor with either a bolt that goes through the pulley/bracket into the motor, or a nut that fastens it to the motor. no special tools needed.
Dash lights 2006
My 2006 kia Sorento ex .Instrument panel lights up when the headlights not on .I notice it when applied the brake mostly at night when park it in my driveway with engine off .
How to fix diagnostic codes po700 and po730 ?
Symptoms of a P0700 DTC may include:
- Malfunction Indicator Lamp (MIL) illumination
- The transmission may exhibit drivability problems like slipping, etc
More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700/PO700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).
For a P0700/PO730 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.
If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself.
Chrysler battery charge light on
check the charging system and battery to make sure these are working properly. if the charging system is not working then the alternator will have to be check and possibly the PCM as the PCM controls charging voltage and the alternator continuously tries to run a max. check for a code in the PCM related to charging. this may help finding the problem.
ACC stopped working
I would ckeck the ignition switch as the car will start and run but the acc part of the switch could be faulty.
Not finding what you are looking for?