Top 20
2011 Suzuki Grand Vitara Questions & Answers
Why does the clutch pedal gets stack down when pressed? (it's a suzuki grand vitara model 2011)
This could be more than one reason. Could you please comment below describing exactly what happens when the pedal gets 'stuck' down?
Does the pedal feel correct as you push it down? Does it change gear normally even when the pedal does get stuck?
If the clutch pedal feels wrong when you use it, the clutch fluid may be low needing to be topped up and the system might need bleeding. Is the pedal slack when you press it or pull it free? This could be a faulty return spring on the pedal.
I have grand virara 2011 model i want to know about red light flicking on dashboard panel
no photos no joy
'and country,warning lamps vary by,
year, country,engine,transmissions, smog laws.
post a photo of it and win.
or open your glove box.
take out the operators guide and read this,
IT IS THERE,
and also says, get the car serviced, for most red lights.
or check engine lights, or ABS, or others.
By pass code for clarion VX401
asked 2 time, why ask twice.
its answered backup one and read.
its been answered here 100s of time, or 22million times on google.
ever do searches?
Fix the gear shift cable on a 2011 suzuki grand vitara
first find cause, no stated symptoms, is park lock out engaged?
the cable is just that a cable with 2 ends and clamps
like all cables (you name it, even a bicycle )
1 gain access to both ends
2: remove both ends clips
3: remove any clamps.
4: cable falls out.
the only hard part is the gain access deal.
the fsm cover this. ever seen a real factory service manual.
or 2nd gets. just read it.
here log in and read
http://www.scantool.net/software/alldata-diy-1-month-subscription.html
may take seats out on some model car's and models and options
vary world wide, this is a USA forum.
Grand vitara 1.9 f9q engine, where is the coolant temp sensor
Sorry don't know exactly but it is generally to be found in the hottest part of the engine - just below the thermostat in the housing or close by in the cylinder head, sometimes in the intake manifold if it is coolant heated and very occasionally elsewhere in the cylinder head...
Grand vitara 09 bleeding clutch, engine was replaced, slave cylinder throwout bearing replaced. Slave not bled on bench?
First, fill the cylinder with brake fluid and then have someone in the car and under it, first crack open the bleeder valve to where it drips a bit. The put your finger over it and have the one in the car push the clutch pedal slowly to where you can tell the air is escaping. Keep finger in place and do this 2-3 times and checking the fluid level every 2 times the pedal is pushed down to insure the fluid doesn't go dry and cause more air in system. Repeat this procedure until you feel like the air is out. Shouldn't take more than 4-5 times and some take more. Hope this gets you going :o) Jesus loves you, John 3:16-17 (KJV)
Thermostat change on 2008 suzuki grand vitara
There's this website
www.reliable-store.com
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything
totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!
Not finding what you are looking for?