20 Most Recent
2011 Ford F-150 Questions & Answers
2011 Ford F-150 5.0 liter 4x4 is stuck in tow/haul but the button does not work or light up. Can anyone help?
One possible cause is a faulty wiring harness in the shifter that wears out and causes a short circuit1. This can be checked by inspecting the wires under the steering column and looking for any signs of damage or corrosion. If this is the case, you may need to replace the wiring harness or repair the wires.
Another possible cause is a bad solenoid switch inside the transmission1. This is a more serious problem that requires opening the transmission and replacing the solenoid. This can be a costly and complicated repair, so you may want to consult a professional mechanic before attempting it.
A third possible cause is a low or weak battery2. Sometimes, the electrical system can act up when the battery is not providing enough power. This can be tested by checking the battery voltage with a multimeter or a battery tester. If the battery is low, you may need to recharge it or replace it with a new one.
A fourth possible cause is a glitch in the electronic system34. Sometimes, the tow/haul mode can get stuck due to a software error or a sensor malfunction. This can be fixed by resetting the system by disconnecting the negative battery cable and waiting for an hour, then reconnecting it. This should clear any codes and restore the normal function of the tow/haul mode
HOW TO DISABLE SEAT BELT WARNING
The easiest way to do this is to wear the seat belt. Other than that, it is not ethical, and in many cases not legal, to do this and you are not likely going to get anyone in this forum to assist you in this endeavor. Not try to be a smart a**, just covering my own.
PO13C f 150 code
Your code means - Exhaust can position actuator circuit, open/short in VCT circuit or solenoid or open in VPWR circuit (Bank1) VCT is Variable Camshaft timing system.
Not finding what you are looking for?