20 Most Recent
2011 Cadillac Escalade EXT Questions & Answers
How to reset alarm system in 2006 Cadillac Escalade ext
PRESS and HOLD LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will sound indicating successful programming. https://repairpal.com/reset-security-system-on-2008-escalade-804#:~:text=PRESS%20and%20HOLD%20LOCK%20and,will%20sound%20indicating%20successful%20programming.
6/14/2022 1:19:00 PM •
Cadillac...
•
Answered
on Jun 14, 2022
How do I remove the entire right passenger side front door on my 2006 cadillac escalade ext in order to put on my new door
The hardest part is getting the bulkhead connector unhooked. You will need to pull back the rubber accordion cover to access the connector and use a pick to get it unhooked from the pillar. Once the connector is free from the pillar it is pretty straight forward on getting the connector undone and separated. Then just unbolt the door stay and hinges and remove the door. It will make it much easier if you spend the time to remove the front fender first, this will allow you to unbolt the hinges from the pillar while the door is closed and latched instead of trying to support the door while you unbolt the door from the hinges.
4/5/2021 4:22:18 PM •
Cadillac...
•
Answered
on Apr 05, 2021
My truck have a flapping like knock under it.it sound like a flapping hitting somethind.but its not my threads on my tire.
Hi Carolyn:
A bit of Sherlock Holmes and you'll find it.
- Does it only happen when you are moving? At what speed?
- Open the windows one at a time. Can you isolate the area where the sound is coming from?
- Check the "mud flap" trim. Any loose bits?
- Check under the vehicle for anything loose.
- Have someone follow you while you are driving. Ask them to look for anything flapping under the vehicle.
- Check the shroud around the fan. Sometimes the retainer pins can come loose.
WORK SAFE, and
Have fun!.
Cheers
3/18/2016 9:05:58 PM •
Cadillac...
•
Answered
on Mar 18, 2016
Check engine light
Sounds like the scan port is not getting power. check fuses. Usually it is a brown 5 amp fuse. on most vehicles.
2/17/2014 1:01:46 AM •
Cadillac...
•
Answered
on Feb 17, 2014
Not finding what you are looking for?