20 Most Recent 2009 Jaguar XF Questions & Answers

yes I have your answer seen this vast times and know how to find this. first off NO COUNTRY TOLD at all , not one clue and PCM are not the same world wide, for sure the OBD2 or EOBD jack. The USA car pin 16 OBD2 jack is power +12vdc, hot.. https://components101.com/connectors/obd2 if not the fuse to that pin is blown FOR SURE. or not using OBD2 2008 newer scan tool the old tools can not do CAN_BUS comms, in fact the pins are missing if you look. pin 6 and 14 must not be missing on the tool or dead. if the car warns you any bulb on car is out,it has CAN_BUS CAN has been a standard on some US cars and light trucks since 1994, but it wasn't made mandatory until 2008 (2001 for European vehicles). CAN_bus here. (the best tools are 2008 up) IMO> ! and this ISO spec,. CAN. 1898-5:2007 , (best ) this is why 2008 cars have and JAG and FORD are married. https://www.scantool.net/blog/how-do-i-know-whether-my-car-is-obd-ii-compliant/

Maybe your keyfob needs a new battery as well

gas tank door will not openon 2009 xf

Is it built into the O/S/F lamp unit?

TAKE IT BACK the strutts have failed it should work all the time

it is under the bonnet near the bulkhead, on the n/s or r/h as you look from the front, it has 4 quick release pipes on it and is secured in a holder with a clamping screw, may have a foam cover over it to enhance the underbonnet look, when you have replaced it DO NOT START THE ENGINE UNTIL YOU HAVE CYCLED THE IGNITION ON/OFF FOR AT LEAST 8 TIMES ALLOWING 5 SECS EACH CYCLE BETWEEN TO BLEED THE SYSTEM,

do they what ?

Check in this link the procedure and the tools request: carpartswholesale.com/diy_center.php?part=Brake+Pad+Set

Hope helps and good luck.

fuses and relays are under the back seat

How to Use Your Jaguar Smart Key System This seems like an answer for your problem.

Hello, unfortunately you will have to have it checked by the experts as there could be quite a few possibilities for the cause. The only one simple fix that comes to mind is that the screen earth wire is no longer contacting firmly. But that is a 30% chance. Even then you would have to loosen quite a few items to check for that.If you are confident enough to try it, then do so, otherwise.. leave it to the knowing. Have a good day.