20 Most Recent
2009 Dodge Avenger Questions & Answers
2009 Dodge Avenger SE. How do I reset the computer on it please.
Question edited for clarity and typo 'Didge' to 'Dodge'.
Question moved to model category.
The technician that replaced the O2 sensors should have reset the codes with a scan tool computer. Go back and ask them to do it. Tell them we said they should have done it, and they must do it for free. It literally takes less than 2 minutes!
Very often the car will automatically turn the Engine Malfunction Light off after about 3 days of driving. It is sampling all the time and will realize the fault is no longer there.
..
ABS
The person you have checking your vehicle is a parts replacer. Not a mechanic. He's just hoping to hit it right, eventually. Have someone check the sensors at the rotors my friend. Most likely one is out of position and not picking up the proper message for the computer. Yes, once the light is out, from all the other work he's done, it will come back on each time. That's just the nature of the beast. If it is just a sensor at the rotor out of adjustment, the light wont come back on.
My 2009 dodge avengers alarm system wont turn off.
Do the power windows an locks work ? Check for broken wires inside door rubber . This boot has wires inside an after years of opening door wires break . Is there door ajar symbol lit on the instrument cluster ?
How do I change the entire headlight assembly on a 2009 Dodge Avenger?
lift the hood on the front of the rad you will find a plastic black cover , its held on with push pin fasteners to remove them you need to lift the center bit , use a small screw driver to do this the fastener now lift out there should be 6 to 8 of them now this cover will come off, you will find 4 10mm bolts that hold the light assemble in place take them out gentley remove said light , the bulb comes out with a 1/4 turn of the light socket DO NOT TOUCH THE GLASS PART OF THE BULB WITH YOUR BARE HANDS AS THE OIL ON YOUR SKIN WILL CAUSE A HOT SPOT AND BURN THE BULB OUT WEAR GLOVES IF YOU NEED TO TOUCH THE BULB! repete process to install
Not finding what you are looking for?