An engine misfire is unlikely to cause that scenario. You need to know what the codes are, but there is more to this. A professional scan tool computer can diagnose the reason. A small hand held scanner is not enough. The pro version can record what happens to make it turn off.
https://www.google.com/search?q=auto+electrician+near+me
..
There is an oil seal at this area that delivers the rotational power of the engine to the transmission. There is an additive that you can add to your oil that can help to regenerate the oil seals by softening them up. I am guessing the shady mechanic did this rather than replacing it.
..
Question edited for clarity.
The most common cause of the P0720 code and its related codes is usually a defective or damaged output or input speed sensor. Sometimes, corroded wiring causes the code to set, as well as loose connectors surrounding either sensor.
JustAnswer
https://www.justanswer.com > Nissan Repair
Dec 12, 2020 - The fuel pump is in the gas tank on this, and unfortunately the tank will need to be dropped to get access to it. Would you like me to send you ...
1 answer ยท Top answer: Hi, I'd be happy to help you with this, and sorry to hear about it quitting on you like that. ...
In a Nissan Altima, code P1574 typically indicates an issue with the ASCD (Automatic Speed Control Device) speed sensor A. This sensor is responsible for detecting the vehicle's speed and providing the necessary information for the ASCD system to function properly.
When this code appears, it usually means that there is a problem with the speed sensor itself, the wiring connected to it, or possibly a malfunction in the ASCD control unit. It can lead to issues such as the cruise control not working, the vehicle not maintaining a set speed, or other related problems.
To diagnose and fix this issue, you may need to perform the following steps:
1. Check the wiring and connections: Inspect the wiring harness connected to the ASCD speed sensor A for any signs of damage, corrosion, or loose connections. Make sure all connections are secure and free of debris.
2. Test the sensor: The ASCD speed sensor A itself may be faulty and need to be tested. You can use a multimeter to check the sensor's resistance and compare it to the manufacturer's specifications.
3. Check the ASCD control unit: If the sensor and wiring appear to be in good condition, the issue may lie with the ASCD control unit. Testing and potentially replacing this unit might be necessary.
4. Clear the trouble code: Once you've identified and resolved the underlying issue, you can clear the trouble code from the vehicle's system using an OBD-II scanner. This will reset the system and allow you to see if the problem persists.
If you are not comfortable performing these steps yourself, it's recommended to consult with a qualified mechanic or dealership with experience in diagnosing and repairing ASCD-related issues in Nissan vehicles. They can provide a more accurate diagnosis and solution to ensure your Nissan Altima's ASCD system operates correctly.
Hello, Malcolm. It seems like you are facing an issue with the alarm system of your Nissan Primera P12 from 2002. Based on the symptoms you've described, it does sound like there might be a fault with the alarm system or the central locking mechanism.
Given that you have already tried a few troubleshooting steps such as disconnecting the battery and replacing the micro switches, it might be a good idea to further investigate the alarm system itself. Since the hazard lights are flashing without any audible alarm sound and the central locking is behaving inconsistently, there could be a fault in the alarm control unit or wiring.
One possible cause could be a faulty alarm module or a loose connection in the wiring harness related to the alarm system. It's also worth checking the condition of the alarm siren to ensure it is functioning properly.
Considering that the issue seems to have improved after disconnecting and reconnecting the battery, it's possible that there is an intermittent fault related to the power supply or a reset of the alarm system.
If the problem persists, it might be best to consult with a professional mechanic or an auto electrician who can perform a more in-depth diagnostic test on the alarm system to pinpoint the exact cause of the issue.
In the meantime, if you experience the hazard lights flashing again, try to document when and under what circumstances it occurs. This information can be helpful in diagnosing the problem more accurately.
I hope this information helps, and I wish you the best of luck in resolving the issue with your Nissan Primera P12. Feel free to reach out if you need further assistance or have any more questions.
To remove the starter motor on a 1994 Nissan Bluebird SSS 2 litre ATTESA-U13 engine (AWD), follow these steps:
1. Disconnect the negative terminal of the battery to prevent any electrical accidents.
2. Locate the starter motor, which is typically located near the transmission bell housing on the engine block.
3. Remove any heat shields or other components that may obstruct access to the starter motor.
4. Disconnect the electrical connections to the starter motor, including the wiring harness and solenoid.
5. Remove the mounting bolts that secure the starter motor to the engine block.
6. Carefully slide the starter motor out of its mounting position and set it aside.
7. Install the new starter motor by reversing the removal steps.
As for finding a repair manual for your Nissan Bluebird SSS, you can try searching online for a digital version that you can download, or you can purchase a physical copy from a reputable auto parts store or online retailer. Additionally, you may also be able to find helpful information and step-by-step guides on online forums and websites dedicated to Nissan vehicles.
Is this a new key as well? On a lot of modern vehicles the vehicle's electronics need to be told that there is a new ignition key and ignition barrel fitted. This will need to be done through the OBD connector under the dashboard. If it is not done the vehicle immobiliser won't turn off as it doesn't recognise the key you are using.
You will probably have to reset the ECU as it thinks the vehicle may be stolen and shuts the fuel supply off.
I always plug a motorbike battery with a cigar lighter plug on it, to keep the electronics live whist changing the battery.
It keeps 12volts on the system and avoids this sort of thing from happening.