Nissan Altima - Recent Questions, Troubleshooting & Support
2014 Nissan Altima. How to unmute audio for Bluetooth please?
The 2015 Nissan Altima does not have a mute button for the Audio system. To unmute the Audio system You will have to turn the volume knob clockwise. If this does not fix the problems with the Audio in the vehicle You can try and attempt a full reset of the radio in Your car. To do this You will turn the ignition key to the "on" position and turn Your radio on, wait ten seconds and then turn Your radio off. Depress the radio power button again and wait for reset. Alternatively, enter Your dealer provided radio code to reset. You can also check to see if You had a call and if You did not press the "call hang up" button on the steering wheel while not on a call it could mute the radio so press it again to un mute it.
2008. How can I reset anti-theft?
ok now i had a problem like this before and i disconnect the battery terminal for a few seconds then replace it then close all doors trunk,and hood then lock and unlock the car with the key or with the remote if it have one, and it solve my problem try it and i hope it work for you it's not my thing but i hope it help you all the same
Why my 2002 Altima won't start?
There could be several reasons why your 2002 Altima won't start even though the engine is turning over. Here are some common causes to consider:
- Fuel system issues: If the fuel pump, fuel filter, or fuel injectors are not functioning properly, then the engine may not be getting enough fuel to start. You can check the fuel pressure and fuel pump relay to see if they are the issue.
- Ignition system problems: If the spark plugs, ignition coil, or ignition module are not working correctly, then the engine may not be getting the spark it needs to start. You can check the spark plugs and ignition coil to see if they need to be replaced.
- Battery issues: If the battery is dead or not providing enough power to start the engine, then the engine may not start. Check the battery voltage and connections to make sure they are in good condition.
- Starter problems: If the starter motor is not working correctly, then the engine may not start. You can check the starter relay and wiring to see if they are the problem.
- Mechanical issues: If there are any problems with the engine's timing, compression, or other mechanical issues, then the engine may not start. This would require a more in-depth diagnosis by a mechanic.
It's best to have a professional mechanic inspect your car to determine the root cause of the problem and make any necessary repairs.
Trying to find the reason for code p2000
The scan tool your using is generic ISO 9141 is used as the protocal. Its not a code. kwp2000 is not shown. Try and use it on manufacture specific or try and get any freeze frame codes and reply or repost. ( Don't forget to turn ignition key to the run position when trying to retrieve codes.)
Not finding what you are looking for?