Mitsubishi Cars & Trucks - Page 9 - Recent Questions, Troubleshooting & Support
2019 Mitsubishi outlander sport crankshaft position sensor location
do have to? there is never any answer to that, nu-diagosed.
no engine told. at all. just 4 banger
no VIN told and 8th digit is engine code.! post VIN .
crank sensor can be in 3+ places, front crank ,mid crank and rear.
yes some car with crank sensor behind fly wheel the tone slots are cut into the flywheel or the (flex plate) so yah tricky on some engines. (just so you know ropes)
if you google correct engine name + crank shaft.
you will see the tone wheel on the crank and bingo location
or read the service manual to learn this fast.
https://eautorepair.net/Marketing/Default.asp
I4 means zero to me
see why?? the wiki shows this generation used all 6 engines
2012 up.
Petrol:
2.0 L 4J11 I4
2.4 L 4B12 I4[29]
2.4 L 4J12 I4[30]
3.0 L 6B31 V6[31]<<< NO
Petrol PHEV:
2.0 L 4B11 I4
2.4 L 4B12 I4
Diesel:
2.3 L 4N14 I4 turbo[32]
if the engine has CAM belt it snapped, and both sensors fail but both sensor are good, and fails compression tests or worse
head poppet valves bent./
my guess someone (kids) put you up to this guess.
or did not scan he PCM
or did not inspect that cam belt?
Interference engines them. list
- 1.5L Interference
- 1.6L DOHC Interference
- 1.6L SOHC Interference
- 1.8L Interference
- 2.0L DOHC Interference
- 2.0L SOHC Interference
- 2.3L Diesel Interference
- 2.4L DOHC Interference
- 2.4L SOHC Interference
- 3.0L DOHC Interference
- 3.0L SOHC 12 Valve Engine Non-Interference
- 3.0L SOHC 24 Valve Engine Interference
- 3.5L DOHC Interference
- 3.5L SOHC Interference
- 3.8L Interference
I flat refuse to do all of those with belt/chain, told.NO!
Mitsubishi Fuso 520538-4 Component 'DEF heating element' has a short circuit to ground.
The error code 520538-4 indicating a short circuit to ground in the DEF heating element is a serious issue and can affect the performance of the vehicle. The DEF system is critical for the vehicle to meet emission standards and should be addressed as soon as possible.
Since you have already replaced all of the DEF system components and even the ECU and the problem still persists, there are a few other things that you can check:
- Wiring harness: Check the wiring harness that connects the DEF heating element to the rest of the vehicle's electrical system for any damage or loose connections.
- DEF Pump: The DEF pump may have a failure that causes the DEF not to flow properly.
- DEF Dosing Unit: Check the DEF dosing unit for any clogs or damage.
- DEF Quality: Make sure that the DEF being used is of the correct quality and specification.
- Software update: Check with the dealer or the manufacturer if there is any software update available that can fix the issue.
It's highly recommended to have a professional technician diagnose and fix the problem as it's a critical emission component and might cause further issues if not addressed properly. The technician can use a diagnostic tool to check the system in more detail and locate the exact problem.
My car is Mitsubishi Pajero io 4g93 so it idles well but when I shift into drive the raise mileage drops below 1 and the engine loses power later engine check light appears.i need help please
The issue you're describing with your Mitsubishi Pajero IO 4g93 could be caused by a number of things. When you shift into drive, the engine loses power and the check engine light comes on, it suggests that there may be a problem with the vehicle's transmission or with the engine control system. Additionally, a low mileage reading could indicate a problem with the vehicle's mass air flow sensor, oxygen sensor, or other sensor that is responsible for measuring the engine's performance.
It's possible that the problem is caused by a malfunctioning sensor, such as the Throttle Position Sensor, that is not being picked up by the diagnostic tool. It's also possible that the problem could be caused by a malfunctioning transmission control module, a problem with the transmission's internal components, or a problem with the vehicle's exhaust system.
It's best to have a mechanic diagnose the issue to determine the cause and make any necessary repairs. The mechanic will have to connect the car to the OBD scanner to read the codes that the engine control module is storing and check the transmission's fluid level and condition, and check the vacuum hoses, or any other issues that could be causing the problem.
Mitsubishi airtrek june 2001 location of computer box if any
The Engine Control Module (ECM) on a 2001 Mitsubishi Airtrek is typically located in the engine compartment, near the battery. The exact location can vary depending on the specific model and engine type.
In general, the Engine Control Module (ECM) is usually located in one of the following places:
- On the driver's side, near the firewall
- On the passenger side, near the firewall
- On top of the engine, near the intake manifold
It's recommended that you consult your vehicle's service manual for the exact location of the Engine Control Module (ECM) in your car
98 mitzi l200 2.8 l eng 4M40
White smoke is a sign of unburnt diesel fuel, check your glowplugs as thats the most common cause when starting .It will start but not hot enough to burn fuel at start up, also check glowplug relay if not the plugs
Delica Owner 4m40
1997 Mitsubishi galant 4 cylinder, How do you get to the tensioner pulley with no sidewall clearance?
La polea tensora sin holgura de la pared lateral generalmente se encuentra debajo del colector de admisi?n. La polea tensora es la parte que se usa para tensar la correa de distribuci?n. Para llegar a esta polea, primero debe retirar el colector de admisi?n. Esto implica desconectar los cables de la bater?a, desconectar el tubo de vac?o y los cables el?ctricos del colector. Una vez que el colector de admisi?n se ha retirado, puede acceder a la polea tensora sin holgura de la pared lateral. Si necesita ayuda para llegar a la polea tensora sin holgura de la pared lateral
Mighty Max Mitsubishi it won't start and I have tried everything cuz someone help me please
I'm sorry to hear that your Mighty Max Mitsubishi is having difficulty starting. There are a number of potential issues that could be causing this problem, and it is important to diagnose the issue accurately in order to determine the most appropriate solution. Here are a few steps you can try to troubleshoot the issue:
- Check the battery to make sure it is charged and that the connections are clean and secure. A weak or poorly connected battery can prevent the vehicle from starting.
- Check the starter and starter solenoid to ensure that they are functioning properly. If the starter is not working, it can prevent the engine from turning over.
- Check the fuel system to make sure that there is fuel in the tank and that it is reaching the engine. A clogged fuel filter or a faulty fuel pump can prevent the engine from starting.
- Check the ignition system to make sure that the spark plugs are functioning properly and that there is a strong spark.
If you have tried these steps and the vehicle still will not start, it may be necessary to have it inspected by a mechanic. They will be able to diagnose the issue and recommend the necessary repairs.
Not finding what you are looking for?