Dodge Dakota - Answered Questions & Fixed Issues

Question edited for clarity. Question moved to model category. It could be a few things, none of them good and all dangerous. Have it checked out by a mechanic. A few of the reasons in the link, disc brakes and suspension are the most likely. https://www.google.com/search?q=2004+Dodge+Dakota.+I+hit+the+brake+pedal+and+the+whole+truck+vibrated+in+the+front+end ..

This might not be engine related. More information please. Does this happen only when you turn the steering or all the time? Is it just when reversing or both directions? Test this by reversing slowly in a straight line for about about one truck's length then gently start turning the steering wheel. Listen and feel for what happens as you turn the steering. Transmissions can also affect how an engine behaves when their put into gear. Do you know if it has been serviced in the past? Have you had it scanned for OBD Trouble Codes? All cars after 1996 have to have this system fitted. Scanning for codes will tell you if it is a sensor causing the issue. If you have to pay for the service ask at 4 or 5 different places as prices can be VERY different. Comment below with the codes and I'll try to help you more.

Question edited for clarity and spelling 'solenoid'. Question moved to model category. It may not be the solenoid, it is a speed sensor error related to 4th gear. The P0734 code stands for "Gear 4 Incorrect Ratio." It's logged when the PCM detects that the RPM of your input speed sensor doesn't match the expected RPM in 4th gear. Aug 17, 2023

P0734 Code: Gear 4 Incorrect Ratio - CarParts.com

More here https://www.google.com/search?q=Dodge+Dakota+P0734 ..

Question edited for clarity. Question moved to model category. All functions of the BCM. You have a computer network error and / or a bad set of connectors. A good auto electrician can diagnose using a professional grade scan tool computer. You can't guess problems like this. https://www.google.com/search?q=auto+electrician+near+me ..

Question edited for clarity and fix the text and add some spaces. Question moved to model category. This is usually cause by air locks. When you have air in the system, the heater core doesn't fill with coolant and doesn't circulate. If you add coolant and you are on a driveway with the front of the vehicle down a few degrees, the heater core doesn't fill. https://www.fixya.com/cars/r29872074-vehicle_cooling_system_no_heat Another outside possibility is that the impeller on the water pump is worn out. Other ideas here and videos https://www.google.com/search?q=1999+Dodge+Dakota+no+heat ..

there is no factory connector you must tap into the existing wiring for brake, turn signals, tail and running lights, they make special adapters to "piggy back" into these wiries, U-Haul trailer rental can do (install and sell) this kit for u very cheap.

Question edited for clarity. Question moved to model category.

3.9L EGR valve location

Dakota Durango Forum https://www.dakota-durango.com > threads > 3-9l-egr-... OBD-II trucks (96 and up) didn't have EGR any longer. If it did it would have a tube coming off the passenger side exhaust manafold and running to the EGR valve ...

2000 dodge dakota egr valve location

Fixya https://www.fixya.com > ... > Cars & Trucks > Dodge 4 hours ago - On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the ... SOLVED: Where is egr valve on 2000 dodge durango - Fixya Oct 26, 2008 Where is the EGR valve located on a dodge durango - Fixya Feb 5, 2009 How to reach the EGR valve on a 2000 dodge durango - Fixya Oct 15, 2015 Where is the location of the egr valve on the 4.7 liter engine Nov 17, 2019 More results from www.fixya.com

Amazon and eBay https://www.google.com/search?q=999+Dodge+Dakota+SLT.+Quarter+glass+replacement

The problem was the motor. Replace the blower motor and resister and it should be fine. If the blower motor resistor is experiencing repeated failure, the blower motor is likely drawing too much current. Excess current draw from the blower motor will cause the resistor to burn out. The blower motor in your truck has a resistor block with multiple resistor wires. Jun 21, 2023

Why Does the Blower Motor Resistor in My Dodge Dakota ...

More here https://www.google.com/search?q=2004+Dodge+Dakota.+It+keeps+blowing+the+blower+fan+resistor ..

The time is shown on the radio display. https://www.google.com/search?q=2001+Dodge+Dakota+clock+location ..

Very good diagrams and description for Dak https://auto-fuses.com/dodge-dakota-diagrams-of-fuse-boxes-and-relays-1997-2000/

The fuse diagram is already printed on the inside of the fuse cover. You could also ollow this link to view the fuse diagram: https://knigaproavto.ru/shemy/en/dodge/dakota/773-1997-2000-dodge-dakota-fuse-box-diagram.html

Check it out right here https://auto-fuses.com/dodge-dakota-diagrams-of-fuse-boxes-and-relays-1997-2000/

Check this one https://auto-fuses.com/dodge-dakota-diagrams-of-fuse-boxes-and-relays-1997-2000/ Very good diagrams

Check relay #R12 under the hood https://auto-fuses.com/dodge-dakota-diagrams-of-fuse-boxes-and-relays-1997-2000/

Question edited for clarity. Question moved to model category. check out the link https://www.google.com/search?q=Dodge+Dakota+4.7+V8.+vacuum+line+diagram ..

It should never be bone dry. The coolant should be topped up to be between the marks. Did you read the Owner Manual? https://www.manualslib.com/manual/40540/Dodge-2005-Dakota.html?page=315#manual ..

Question edited for clarity. Question moved to model category. First diagram in this link as shown on JustAnswer, but you don't even need to go there, just click on the diagram. https://www.google.com/search?q=2002+dodge+dakota+sport+3.9+v6+firing+order ..

In this link https://www.google.com/search?q=1996+Dodge+Dakota+with+3.9+L+engine.+Vacuum+lines+diagram ..

Question edited for clarity. Question moved to model category. Sensor issues or wiring to them.

Code P1391 Dodge CMP or CKP Signal Intermittent ...

AutoCodes https://www.autocodes.com > p1391_dodge Engine Light ON (or Service Engine Soon Warning Light) · Lack/Loss of Power · The engine may be harder to start · The engine may stumble or stall.

Cam Sensor Failure Causing no Start or Stalling : Dodge ...

RepairPal.com https://repairpal.com > Problems > Dodge > Dakota On 3.7L V6 and 4.7L V8 engines the camshaft position sensor may fail causing the engine to crank but not start or it can cause intermittent stalling.

Dodge Dakota Vehicles With This Problem

RepairPal.com https://repairpal.com > Problems > Dodge > Dakota On the 3.9L V6 and 5.2L V8, an intermittent connection in the crank position sensor wire connector can cause poor engine performance or the engine may crank but ... ..