Buick Park Avenue - Recent Questions, Troubleshooting & Support

0helpful
1answer

1996 Buick Park Avenue with electronic adjusting front suspension. Would like to find a delete adaptor so I can replace the struts without the huge cost.

Conversion kits to passive suspension

Strutmasters 1991-1996 Buick Park Avenue Front ... - eBay

eBay https://www.ebay.com > itm Strutmasters 1991-1996 Buick Park Avenue Front Electronic Strut To Passive Strut Conversion Kit is the perfect solution to your air suspension problems. US$419.00 Missing: adjusting ‎ adaptor

Gm Magnetic Suspension Delete Kit, No Sacrifice Of Ride ...

kissfriseure.de https://gm-magnetic-suspension-delete-kit.kissfriseure.de The 2006-2011 Buick Lucerne Front Electronic Suspension Conversion Kit ... Suspension Kits, Air Springs Replacement Kit,1997-2005 Buick Park Avenue, 1995 ... https://www.google.com/search?q=1996+Buick+Park+Avenue+electronic+adjusting+front+suspension+conversion ..
2/11/2024 8:42:24 PM • 1996 Buick Park... • Answered on Feb 11, 2024
0helpful
2answers

Where is the fuse box at on a 1997 buick park

Hi,
The fuse box is located on the inside of the car passenger side. You have to open the door and it is behind the panel on the side of the dashboard. Look under the motor and it will be under the black square box cover.

Thank you !!
11/30/2023 9:47:53 PM • 1997 Buick Park... • Answered on Nov 30, 2023
0helpful
1answer

2004 Buick Park Avenue. I need to know where the two hoses run from the heater core please.

Question edited for clarity, turn question around, add CAPS and spaces! Question moved to model category. Videos that should help showing replacement on Buick. https://www.google.com/search?q=2004+buick+park+avenue+heater+core+replacement And this picture by picture series https://www.2carpros.com/questions/heater-core-replacement-3975419 and this as well which refers to flushing but shows hoses https://buickforums.com/forums/threads/how-to-flush-the-heater-core.37871/ ....
9/24/2023 3:02:34 AM • 2004 Buick Park... • Answered on Sep 24, 2023
0helpful
1answer

2001 Buick Park Avenue. I am having issues with driver door controls on it. No window, door locks, mirror controls.

Question edited for clarity. Question moved from Spanish car company 'Seat', pronounced 'see-at'. That sounds like the door switches, or possibly a break in the harness that goes from the door to the door frame. They always fail on the drivers door because of the amount of times they open and close. Or it may be a communications issue. The only way to diagnose is by an auto electrician connecting a professional grade scan tool computer. There may also be DTC codes relating to the communication aspect of the network modules and they way they talk to each other. https://www.google.com/search?q=auto+electrician+near+me ..
8/4/2023 2:30:45 AM • 2001 Buick Park... • Answered on Aug 04, 2023
0helpful
3answers

How to change a serpentine belt

This SHOULD be how it's done, but not so on the 90's Park Aves.
With this 3.8 L V-6, you have to remove the motor mount on the side of the engine--and without the proper tools it's about a $290 job for the dealer.
7/13/2023 8:03:14 AM • 1995 Buick Park... • Answered on Jul 13, 2023
0helpful
2answers
0helpful
2answers

01 buick park ave passenger door won't open from inside or out nor will the door behind driver side either what do I do?

You must remove the door panels and check for a disconnected lock release rod.
3/7/2023 3:10:53 AM • Buick Park... • Answered on Mar 07, 2023
0helpful
2answers

Door handle wont open

buy a new handle for twenty bucks.
3/7/2023 2:38:15 AM • 2000 Buick Park... • Answered on Mar 07, 2023
0helpful
1answer

2004 Buick Park Avenue. How do I bypass the anti theft system please?

It is very difficult to bypass because the anti theft system and immobilizer is there to stop exactly what you are trying to do. It is better to fix it rather than finding a way to defeat it. Have a read. https://www.fixya.com/cars/r29887709-gm_passlock_security_system https://www.google.com/search?q=2004+Buick+Park+Avenue.+How+do+I+bypass+the+anti+theft+system
2/22/2023 5:21:41 AM • 2004 Buick Park... • Answered on Feb 22, 2023
0helpful
1answer

1996 Buick Park Avenue interior lights stay on all the time. How can I fix this?

you should check and see if one of your door sensors is faulty.
2/12/2023 8:55:39 AM • 1996 Buick Park... • Answered on Feb 12, 2023
0helpful
1answer

1990 Buick Park Avenue. Code 41 and 42. 3800 VIN C engine.

Question edited for clarity and typos. Question moved from Misc to model category. Camshaft magnets https://www.google.com/search?q=1990+Buick+Park+Avenue+replace+cam+magnets What you really need is a mobile auto electrician with a prograde scan tool computer to diagnose and test all the sensors. Code 41 https://www.google.com/search?q=1990+Buick+Park+Avenue+code+41 Code 42 https://www.google.com/search?q=1990+Buick+Park+Avenue+code+42 ..
1/18/2023 7:39:33 PM • 1991 Buick Park... • Answered on Jan 18, 2023
0helpful
2answers

1989 Buick Park Avenue will not start, still

have the same issue with mine..try heating the coil pack with a hair dryer and see if it will start..does your car have the 3.8l motor?
1/3/2023 5:28:38 AM • 1989 Buick Park... • Answered on Jan 03, 2023
0helpful
1answer

99 BUICK PARK AVENUE 3.8 ENGINE. ENGINE MISFIRES WHEN HOT, MORE NOTICABLE 45 TO 50 MPH. DOESN'T MISFIRE ENOUGH TO SET CEL.. TUNE UP, PLUGS, WIRES, FUEL AND AIR FILTER HAS BEEN REPLACED.

Could be a coil breaking down , you did replace them did you ? Take a spray bottle of water an spray the coils , mite find cause of the misfire . Also look at coils for a discoloration , a rainbow affect . Or you can power brake the vehicle an take a test light an put neg . clamp end on battery neg . an then move the point end around the coils .
11/28/2022 7:30:12 PM • 1999 Buick Park... • Answered on Nov 28, 2022
0helpful
1answer

I have a 1998 Buick Park Avenue Ultra, Supercharged.

Question edited for typos and add some spaces.. Question moved to model category. You just fit a Bypass Pulley. This takes the place of the AC compressor, the belt and routing stay the same. https://www.google.com/search?q=1998+buick+park+avenue+ultra+bypass+air+compressor ..
10/26/2022 4:29:56 AM • 1998 Buick Park... • Answered on Oct 26, 2022
0helpful
1answer

How do I bypass 1992-94 buick park avenue security system?

On mine I bypassed it with this solution after it was locked down for weeks: http://newrockies.ca/vatsbypass . This one will bypass the entire system and not only the key and lock cylinder. I wanted to kick the whole system out of my car and never hear about it anymore.
9/28/2022 9:04:29 PM • 1992 Buick Park... • Answered on Sep 28, 2022
0helpful
1answer

1991 Buick Park Avenue. Interior/door lights stay on when not running and causes battery to go dead. Where are the switches located? I suspect a door jam type switch is faulty on one or more doors.

to solve this it takes only 2 things, a meter and schematic of the dome lap circuit on any car. yours is easy new cars this runs off BCM computer magic. 31year old, most switches that old fail. be it 4 doors or dome lamp switches up high. can all fail. called door jamb switches, bad / if are each dome lamp is turned off. at the park switch or at the dome. the cures, I have no users guide, (rare) so answer is generic 1: turn off dome ,via. steering stalk park switch some have dome setting 1b:: the dome lamps them self have a switch, of some kind stated in the mission manual 2: remove all these 1 by one, or first open all 4 doors and cycle the switch see of dome goes off. on most cars door closed is switch open if true we remove the switch and pull the plug and dome goes off if yes the switch was bad. jamb-undefined-undefined-0.jpg
8/30/2022 6:16:29 PM • 1991 Buick Park... • Answered on Aug 30, 2022
0helpful
1answer

Where is the Inertia switch for 1989 Buick Park Avenue

This is what it looks like. https://shop.advanceautoparts.com/find/1989-buick-park-avenue-electric-fuel-pump-inertia-switch.c23318669 But no one is saying where it is! There are often behind the outer kick panel in the driver or passenger footwells. https://www.google.com/search?q=1989+%22Buick+Park+Avenue%22+Inertia+switch+location ..
7/19/2022 5:00:49 PM • 1989 Buick Park... • Answered on Jul 19, 2022
0helpful
1answer

1996 Buick Park Avenue belt change stud on motor mount nut, the same stud that holds sleeve that has to come off to put the belt on. Won't come out to put belt sprayed with Kano still won't come out?

That's better Roger. Question edited for maker and tidied up a bit. Question moved to sub category. It sounds like you need a Stud Extractor Tool https://www.google.com/search?q=stud+extractor The videos _may_ show tricks https://www.google.com/search?q=1996+Buick+Park+Avenue+belt+change ..
6/3/2022 3:51:17 PM • 1996 Buick Park... • Answered on Jun 03, 2022
0helpful
2answers

Have replace 4 coil packs in the last year and half. the car shut off as I am driving down the road and will not start back up. What would cause this?

Engine Stalling Due to Mass Air Flow/Crankshift Position ...

repairpal.com > Problems > Buick > Park Avenue Buick Park Avenue Engine Stalling Due to Mass Air Flow/Crankshift Position Sensor ...engine shuts off when driving. ... The next two times it stop while driving it took longer to start, so i decided to ... 2000 Buick Park Avenue- 3.8L V6Visitor.
3/17/2022 10:01:54 PM • 2000 Buick Park... • Answered on Mar 17, 2022
Not finding what you are looking for?

5,994 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Buick Cars & Trucks

  • Forum

View Most Popular

  • Buick Cars & Trucks
Loading...