SOURCE: 1997 yamaha timberwolf 4 wheel drive only front wheel drive work
check to see if driveshaft to rear is turning.if it is, either the ring gear & pinion gear in the differential are not making good contact either from being worn, or out of alignment due to worn bearings in differential case,or both.check if axle has back & forth play in differential,indicating worn beaings. also could be worn ring gear to axle contact in differential.check for vibration in axle while in gear increasing as you give it more gas, caused from ring gear teeth slipping past teeth on axle.they would have to be replaced together. oversize wheels & tires tend to accelerate axle/ring gear contact teeth.
SOURCE: what is valve clearance for a 250 yamaha timberwolf
what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer
SOURCE: Need to find serial number on 1997 Timberwolf 250
It should be stamped on the left hand lower frame.
SOURCE: my 1998 polaris trail blazer 250 automatic wont go
The problem is a worn shift fork inside the transmision. Replace the shift forks and check the forward gear pinions and forward shift dog pinions for wear. If the pinions show any signs of wear replace them too.
1,013 views
Usually answered in minutes!
×