Question about ATVs
Search engine are more efficient. If this isn't to your liking
try searching "clutch nut torque spec"
Posted on Oct 16, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: torque specks
hi 1999 chevy malibu head bolts 1-8 40 ft lbs bolts9-10 30 ft lbs tighten all bolts an additional 90 degrees
rod bearings 18 ft lbs plus additional 80 degrees
top row of bolts 9 3 1 5 7 bottom row 10 6 2 4 8 from left to right
Posted on Feb 12, 2009
SOURCE: pinion nut torque spec chev
Axle Preload and Backlash Specifications
8.0 Axle Preload and Backlash Specifications
Pinion Bearing Preload, New Bearings
15-30 lb in
Pinion Bearing Preload, Used Bearings
10-20 lb in
Pinion and Differential Case Bearing Preload, New Bearings
30-55 lb in
Pinion and Differential Case Bearing Preload, Used Bearings
25-45 lb in
Posted on May 20, 2009
SOURCE: I need the torque specs
The pinion nut does not have a torque spec. as in how tight the nut is. The amount of torque is measured in bearing preload. You will need a "torque to rotate" torque wrench. If you are using new bearings the torque spec. is 15-25 in. lbs. If you are using your old bearings the torque spec. is 10-20 in. lbs to rotate. To measure this you will need to tighten the nut in small increments then use the torque to rotate wrench to turn the pinion without the carrier/ ring gear installed. Repeat until desired torque is reached.
Posted on Jan 29, 2011
Tips for a great answer:
May 27, 2018 | ATVs
Jul 02, 2017 | ATVs
Feb 28, 2016 | ATVs
Dec 28, 2015 | ATVs
Oct 22, 2014 | ATVs
Feb 13, 2014 | Arctic Cat 2006 400 DVX LE Tony Stewart
Dec 31, 2013 | Arctic Cat 2008 366 4x4 Automatic
Sep 30, 2013 | Arctic Cat 2006 650 H1 4x4 Automatic SE
40 people viewed this question
Usually answered in minutes!