20 Most Recent
Polaris 2010 Sportsman 500 H.O Questions & Answers
How do you remove and replace wheel studs?
Tap the threaded end with a soft face hammer and the stud will come out through the hub. To replace you tap the flat head of the new stud into the hub from the opposite side.
They have a spline on them that binds with the hub. Best to support the hub so as not to bend the alloy.
2010 sportsman 500 hd runs then dies turns over won't start
My opinion, it's running rich and letting it idle for 5 minutes doesn't help. Whether it's carbed or EFI, when the machine is cold, it needs more fuel. As engine temperature increases, it doesn't need as much fuel, and the carbon that started building up on the plug is burned back off. When a machine isn't ran for very long, carbon deposits continue to build on the plug. The carb itself may need to be rejetted/adjusted, it it's running rich,
Stalling out while riding
think u correct saying it flooding had same problem sticking float now and again changed float no more problem or getting starved of fuel.
2001 500 HO is stuck in High Forward gear
If the shocks are worn out, get off the machine and lift up on the back rack. This takes up the slop between the shifter box and the transmission, and usually allows me to shift. I also had an issue with the thin steel plate behind the shifter box. Got a crack in the top , so it was flexing, creating more slop. Welded it shut, good as new.
3/17/2015 12:50:04 AM •
Polaris ATVs
•
Answered
on Mar 17, 2015
Exhaust
what?? it just bolts on??
6/22/2014 9:11:43 PM •
Polaris ATVs
•
Answered
on Jun 22, 2014
Not finding what you are looking for?