20 Most Recent Yamaha 2004 BearTracker Base Questions & Answers

Replace the bulb ?

belt drive broke or clutch is sticking on belt drive assy

Hey Anon, this is NOT something to "try and learn" how to do..find a professional that is will to tutor you when you do this for the first time! It COULD save you A LOT of $$$$!!!!!

If you have good spark then it's most likely a fuel issue, anything off of idle is dealing with the main jet and metering needle, clean jet and check needle for excessive wear.

Check the fuel flow through the tank valve. There are screens inside the tank that may be blocked and restricting flow.

.004 intake .005 ext

must hold brake, use the foot brake!

take off the horn unit power it direct if it works its ok, if not replace, next step wire a small bulb into the horn wires and press the button if it lights the switch is ok, if you have a circuit tester put one end on the battery ground and check for power in the horn wires if their is power there put the lead on battery positive and press the horn button if there is no power their the switch or wiring is faulty

Question edited for clarity, correct order and add maker. Question moved from Cars and Trucks to model category. Service manual https://www.manualslib.com/products/Suzuki-Kingquad-5901790.html ..

https://www.motosport.com/atv/oem-parts/suzuki/2004/eiger-400-4x4-auto/wiring-harness

It seems that the clutch is not disengaging may need a adjustment unless it is hydro drive then I am stumped.