Mitsubishi WD - Recent Questions, Troubleshooting & Support


remove the lamp and check to see if its ok, if ok replace lamp thermal sensor

Mitsubishi... | Answered on Oct 10, 2019


My guess is that it is not economical to fix as it needs new screen. Unless it's under warranty but then you would not be asking. I had an off brand tv that I sold at my Radioshack franchise year ago. I had a customer get a tv with one white pixel constantly on. I replaced it for him. When I called the mfg, they informed me that this was allowable error in the b grade displays they used in their TVs. I quit selling them and put the bad one in my Rv. Still ticked me off when I watched it

Mitsubishi... | Answered on Oct 02, 2019


did u by any chance open the assembly of the tv and touched the pcb board... the circuits on this board r very delicate and u shud be very if u r handling tis....

wen u switch on ur tv r u able to listen to any sound or wat?
if yes reply back, i wil help u

Mitsubishi... | Answered on Jul 25, 2019


Yes it is. It's a cheep fix. The fans are on ebay. If you have the manual for the TV. Look in the specs for the TV and locate the fan. You will see the voltage and rpm of the motor. Most likely it will be a 12v dc fan. It has two to four screws holding the fan. And a small plug. I hope this helps you in some way. THE CB SHOP OF COLEBROOK NH. Via Facebook.

Mitsubishi... | Answered on May 18, 2019


try blowing out the set and especially the three fans and the area around them---seen a number of these where a dirty fan will slow down just a little and even stop set from coming on at all or shutting down sometimes.

We usually roll them outside and with a aircompressor clean the set out, it usually looks like a dust storm.

I have had more than a few brought in that would not power up and as soon as cleaned outside, came up and worked.

The actual air intakes are on the front of the set and dust gets sucked into the unit.

Mitsubishi... | Answered on Apr 05, 2019


check out steps-by-step guide to fix error code 3-4 at:
https://mslivesupportchat.blogspot.com/2019/01/error-code-3-4.html

Mitsubishi... | Answered on Feb 12, 2019


Did you let the green light flash for about 70 seconds? It goes thru a self check when plugged in and takes a little time

Mitsubishi... | Answered on Jan 04, 2019


Did you check the caps on the power board when you had it out?

Mitsubishi... | Answered on Nov 16, 2018


One of two possible issues:

1. Lamp is nearing end of life and may dim just before total failure.

2. A few of these models have 2 mirrors(check with Mitsubishi to see if yours is one) A large mirror in back (never gives a problem and do not try to clean it. Some idiot in these sets used a small mirror inside that the optical unit shines the picture into (wedge shaped mirror and small) and it is facing up----the fans intake air from the front of the set around this mirror--it gets coated with lots of dust---Picture can loose up to 70% of its brightness and clarity if that mirror is dirty--looks like 20 year old set .

If you do not wish to check with Mitsubishi GOOGLE THE MODEL NUMBER with "mirrors" to see.

If it has 2 mirrors I can tell you exactly how to get at it.

SD TECH

Mitsubishi... | Answered on Aug 06, 2018

Not finding what you are looking for?

-2,058 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mitsubishi Televison & Video

  • Forum

View Most Popular

  • Mitsubishi Televison & Video
Loading...