Invicta Watches - Recent Questions, Troubleshooting & Support


Take your Invicta watch to a jeweler who will open it, identify the battery type, and perhaps sell and install a new one.

Invicta Watches | Answered on Jan 12, 2019


Google (invicta)(89280B)(manual) without parens.

Invicta Watches | Answered on Jan 02, 2019


The battery number should be engraved on the back.

Invicta Watches | Answered on Dec 23, 2018


Nobody knows this information. You use the same battery that is inside it. My advice is to take it to a local jeweler. They have all the batteries and the tools and know how to remove the back. The cost is 8 to 15 bucks and is done in 5 minutes whilst you wait. It really isn't cost effective to do it yourself as generally, you will have to buy 10 batteries in a pack. Also, if you damage the back, or any screws, the cost is buying a new watch. This watch is water resistant to 100 metres, so it also has gaskets to contend with. It is a $795 watch, do you really want to do this yourself!

https://www.invictawatch.com/watches/detail/14813-invicta-sea-spider-men-50mm-stainless-steel-gold-gold-dial-vd54-quartz

Invicta Watches | Answered on Dec 05, 2018


Take it to a local jeweler. They have the tools and all the batteries. Done whilst you wait for between $8 and $15.

Invicta Watches | Answered on Dec 04, 2018


Take your Invicta to a jeweler for a demonstration of how to open it without damage.

Invicta Watches | Answered on Nov 26, 2018


How long had it been setting? I would check your fuel system for a fuel delivery problem. Spray a short burst of starting fluid into the carb and see if it will start.

Invicta Watches | Answered on Nov 21, 2018


we do not value anything here. this is a repair help website

Invicta Watches | Answered on Oct 30, 2018


377 SR626SW SB-AW AG4

Invicta Watches | Answered on Oct 30, 2018


sr920 is the battery of your watch.

Invicta Speedway... | Answered on Oct 27, 2018


Probably by battery replacement

Invicta Watches | Answered on Sep 28, 2018


The answer to your specific question is the 2nd instruction below...I've also included two other settings:
Here are the 3 main crown positions you need to know once you unscrew it from its locked down position:
1) unscrewed, it can be manually wound, in one direction [clockwise}...20 to 30 half-turns seems to be good to get it through the night.
2) then, pulled out one small stop, the date can be advanced by turning the crown towards you (ie, counterclockwise)
3) pulled out one more stop, the time is adjusted by turning the crown.
I hope this helps!

Invicta... | Answered on Sep 28, 2018


Easy, just get a cheap watch repair kit online at Harborfreight.com with mini flathead screwdriver, and find the raised part of back panel at edge near knob. GENTLY LOOSEN panel to remove. Pull out battery bout in new one close bpamrl firmly. If no raised edge to open instead many cut out facets or indentations around entire back panel then use tool looks like small wrench to grab into those indentations and GENTLY TWIST to open

Invicta Watches | Answered on Sep 03, 2018


Take it to a local jeweler. Replaced while you wait for $8 to $15. They have all the batteries and the tools to get the back off.

Invicta Watches | Answered on Aug 31, 2018


Take your Invicta watch to a jeweler who will open it, identify the battery type, and may even be persuaded to install a replacement for a reasonable sum.

Invicta Watches | Answered on Aug 27, 2018

Not finding what you are looking for?
Invicta Logo

959 questions posted

Ask a Question

Usually answered in minutes!

Top Invicta Watches Experts

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Norman Worley

Level 3 Expert

1273 Answers

Are you an Invicta Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...