HP Computers & Internet - Recent Questions, Troubleshooting & Support

hi Names Rui, try downloading a new cd/dvd burner software and install it to your PC thier are many types of cd/dvd burner tryto search free ones at google here is one link that i will give you
http://download.cnet.com/Free-Easy-CD-DVD-Burner/3000-2646_4-10627009.html just download and install it. try it hope you like it.

HP Compaq... | Answered 7 hours ago

Definetly the ati one. 120 stream processors is really good and it has
direct x10.

HP Pavilion... | Answered 12 hours ago

There is no HP pavilion 1532h made by HP.

HP Computers &... | Answered Yesterday

Start by checking your event logs.

HP Compaq... | Answered Yesterday

what is your type of motherboard. See part number of your laptop to confirm the type of Non-volatile memory it uses.
HP ProBook 450 G2 Notebook PC and HP ProBook 455 G2 Notebook PC Statement...

HP Computers &... | Answered 2 days ago

Step 1:
disconnect all external devices including battery & AC adapter
Press and hold the power button for 10 seconds to discharge any or all static from the PC.
Step 2:
Connect back the battery & AC adapter
press the windows key + B and at the same time press the power button.
This should clear the BIOS (Incase of BIOS issues or interrupted updates)

HP Computers &... | Answered 3 days ago

It's trying to boot off a network. Change your BIOS settings.

HP Compaq... | Answered on Jan 18, 2019

try this: Make sure the battery for the notebook is out in step 8

the procedure to reset the CMOS/BIOS is in the maintenance and service guide on page 46.

Follow these steps to clear the password:
NOTE: These steps also clear CMOS.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 48).
5. Remove the real-time clock (RTC) battery (see RTC battery on page 68).
6. Wait approximately 30 minutes.
7. Replace the RTC battery and reassemble the computer.
8. Connect AC power to the computer. Do not reinsert any batteries at this time.
9. Turn on the computer.
All passwords and all CMOS settings have been cleared.

HP Compaq 6530b... | Answered on Jan 18, 2019

there is no support for 21 year old OS, 98
is this a joke>?
eject the CD, and it will not spin.
no PC stated at all just Pavilion notebook.
and the HDD is dead or the OS is corrupted, just like all 21 year old notebooks are.
the service tag on the bottom clearly shows what model PC this is.
called the HP service tag. see all those numbers/
bingo what it really is, is there.

HP Computers &... | Answered on Jan 17, 2019

To better determine what is causing it to reboot, first ensure your computer isn't configured to restart on a failure. From windows explorer, you can right-click on "This PC" or "My computer" and select "Properties". From there, there should be an "Advanced" tab, with a section titled "Startup and Recovery". Click on the "Settings" button in that section, to bring up the "Startup and Recovery" settings. There is a "System Failure" section, with an item "Automatically restart". Uncheck that, and click "Ok". The next time you have a failure, you should get a "Blue screen of *****", that has error information. You can google the error code to figure out what is failing. If you still don't see a blue screen of ***** when it fails, it implies an overheating issue. Look for tools to monitor CPU/GPU temperature, like "Speccy", and you can see if either is running too hot. Hope that helps.

HP Computers &... | Answered on Jan 17, 2019

I had the exact same problem so I called HP support.The instructions were- remove power cord from lap top if power cord is connected, then remove battery, connect power cord to lap top then turn on lap top by holding power button down for 30 seconds. It booted up, no problem. The proceedure is to remove static electricity.

HP Pavilion... | Answered on Jan 16, 2019

Right-click on your desktop, select "view"and on the small drop-down window click on "Show Desktop Icons"

HP Computers &... | Answered on Jan 10, 2019

you posted a statement of fact not a question.
it will support
will it support(a real question)

well NO
and NO PC stated, only mobo.(lost the PC ?)
nor that this PC was mobo bought in India?
YOUR mobo is core2, not core(tm) processor
they are not even the same class nor socket
here is the list of core i3 (all are LGA
your mobo is core2. (older )
all are over 1000 pins, LGA1156 (gen 0)

you can not stuff 10 pounds(or kg) of mud in 1 pound sack.
no can do.

HP Computers &... | Answered on Jan 08, 2019

Not finding what you are looking for?
HP Logo

78,070 questions posted

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2678 Answers

pankaj rautela
pankaj rautela

Level 3 Expert

1252 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides