2005 dodge magnum hemi po340 code changed camshaft sensor still wont crank
The code that came up is for a camshaft sensor. The cam sensor usually controls injector pulse. Pick up a noid light at your local parts store which should be very cheap. Connect noid light to plug at injector and crank vehicle. If the noid light lights up, then you know that you are getting a signal to injectors and your cam sensor is working. If it doesn't light up, it's possible that your new part can be defective ( it is possible). Because you have a Chrysler product and a no start condition, check to see if you have spark causing the no start. If you have no spark, check your crankshaft sensor. Chrysler products are known for crank sensors to go bad. If you have spark, further testing is required. I hope this helps and have a great day.
Dodge Cars &...
2 days ago
Engine light on. Reader says: Evaporative Emission System Leak.. What is it and where?
the evaporative emission system (EVAP) is that system that controls the petrol fumes and evaporation of the fuel from the tank to the injectors
It has a purge valve, charcoal canister fuel cap and various other parts like hoses
a small leak can be the purge valve , cracked or loose fuel lines from the filler cap to the pump,loose filler cap
I suggest that you take it to an accredited service centre to have it checked out as from you what and where questions it will be difficult to determine exactly what to look for or where to look
3 days ago
Not finding what you are looking for?