Televison & Video - Page 8 - Recent Questions, Troubleshooting & Support


The code will be found in the Kevin remote control, if it is compatible with the Skyworth TV.

Televison &... | Answered 2 days ago


Hmmm, Your question (I have a great picture but no sound?) is extremely vague. Let's check the obvious first, and proceed to the obscure...
With your Remote Control, turn up the TV volume. - Does the numeric or gas-guage type of audio level display on your TV? If the audio level does not display on your screen you might have a problem with your remote control. Try to adjust the volume with the volume adjust buttons or sensors on the TV, usually found on the rear side of the TV close to the right or left side. Sometimes these controls are on the front, top, or bottom of the TV frame.
Next let's check the source of the picture, and how the sound goes from the source to your TV. If the source only outputs sound from the analog sound jacks (usually red and white, and labeled Audio Out) you will need to connect audio cables from the source's Audio Out Jacks to the Audio In Jacks of your TV.
If your setup uses HDMI cables, ensure the cables are seated properly on BOTH the source device and the TV. You COULD have a problem with the HDMI cable that only affects the sound, but replace that cable as a last resort. Ensure the SOURCE device (such as a satellite TV or cable box) does not have the sound MUTED. (DOH!)
Next go into your TV MENU. Select SOUND (or AUDIO) and scroll through the features to ensure that the source of the sound input is the actual input you are using. Ensure the TV SPEAKER selection is enabled. Ensure that the digital optical output option is not selected if you are not using it. If your TV has an old-school headphone jack, ensure that a cable is not inserted into the headphone jack.
If you have another TV you can connect to your source, you can quickly determine if the sound problem is with your original TV or the source device. You might be able to also use another input device with your original TV to determine if the TV produces sound from this alternative source.
You might even hook up a cheap digital TV antenna directly to your TV's RF jack, if there are local TV stations you can pick up. If you can see a TV channel picture but no sound, then the problem will definitely be in your TV.
Inside nearly every TV is a circuit board dedicated to sound output. The problem may be on the sound circuit card or from the circuit board that is feeding the sound to the sound circuit board. Very rarely would the two speakers both fail at the same time... but a damaged headphone jack (caused by a foreign device that was jammed into the jack and removed) can cause this problem. If you have a damaged headphone jack and don't need it, simply remove the wires from the headphone jack and connect these wires directly to the speakers.

You can purchase a replacement sound card and install it pretty easily. If that doesn't fix the sound problem, you might need to replace the tuner circuit card.

Good Luck, and let me know if any of this helped you!
.

Televison &... | Answered 2 days ago


Have you gone to menu and to your network?
Have you seen the option Wireless Network.
Have you searched you network and connected it.
If you have a pass word to your wireless you will have to enter it into your tv and connect it?

Teac Televison &... | Answered 2 days ago


Ok so this one is complicated In my experience with this type of issue if you remove the back of the tv and look for a swollen capacitor as u can see on this pic of what I am speaking of. I had a 60 inch flat screen did the same thing. I opened it up found the one that was swollen and on mine there was only one I removed it desolidered it I went to Apache reclamation it’s a store here in Phoenix that is like a thrift store for machine parts and things like that. I m sure you could probably order one from eBay. Anyway we found the one we need and it was a little larger in size but was the same voltage and soldiered it on to the board and the tv now works. If you think you could take that on go for it. You won’t make it any worse right?
1_20_2019_3_35_09_pm.jpeg

Hisense... | Answered 2 days ago


I hopped on over to the website: https://electronicshelponline.blogspot.com
In the search window (in the upper right corner) I typed: Panasonic TV Blink Codes
While your exact TV model is not mentioned, most of the Panasonic TV 12-blink error codes referred to a Sound SOS circuit board. If you take a look at that site, and search for the year your TV was manufactured, you might find more specific information.

Panasonic... | Answered 2 days ago


I found your post because I had the same problem, but I actually just found my code sheet. Let me know what codes you need and I'll look them up!

Televison &... | Answered 2 days ago


IF THE AUTO SCAN DID NOT FIND IT THEN YOU CAN NOT GET IT .

Panasonic VIERA... | Answered 2 days ago


GOOGLE IT WE DO NOT HAVE HERE

Televison &... | Answered 2 days ago


Contact Tesco HQ for registration details.

Televison &... | Answered 2 days ago


just use the remote and put the tv on constrast then type in 9735 and walla service menu

Televison &... | Answered 2 days ago


If the TV is fairly old and you want a remote, the best place is Ebay, or an old TV repair shop, most codes you put into a new programmable remote you have have the old one.

Televison &... | Answered 2 days ago


https://www.inforisticblog.com/2014/12/2-easy-ways-to-clear-dstv-e16-error-in.html?m=1

follow this link , i would try the 2nd option, it says In Nigeria, sorry if this is n't where you are but is the only reference i could find
https://www.youtube.com/watch?v=eMR_9U2r74c
also utube video

Televison &... | Answered 2 days ago


there will be a volume control button on the remote control, will have a + and - , there will also be buttons on the TV check the users manual

LG Televison &... | Answered 2 days ago


you seem to have done all the correct things, have you hard reset the box, i.e pull the power lead when box is turned on ? if this doesn't work then i would return the box as must have warranty as 6 months old, if you can borrow another box any make will do and see if that will tune in then you know if it's your box or the dish

Televison &... | Answered 2 days ago

Not finding what you are looking for?
Televison & Video Logo

644,721 questions posted

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Cindy Wells

Level 3 Expert

5725 Answers

Marvin
Marvin

Level 3 Expert

83850 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...