Refrigerators - Page 2 - Recent Questions, Troubleshooting & Support


Check to see that your refrigerator is set to its optimal setting. LG recommends 37 degrees for the refrigerator and 0 degrees for the freezer. If additional cooling is required, start by lowering the temperature a few degrees to achieve your desired temperature.Oct 26, 2018

LG Help Library: Not Cold Enough - Refrigerator ' LG U.S.A


https://www.lg.com/us/support/product.../CT10000021-1426094905942-not-cold-enou...

https://www.google.com/search?q=recommended+temp+for+LG+Refrigerators

LG Refrigerators | Answered Yesterday


The difference is 7 ohms impedance, it will probably work, but the 15 is much cheaper and readily available on eBay. With no refrigerator I personally would put the 22 in so I could have a fridge, and order the 15.

Refrigerators | Answered Yesterday


DID IT GET LAID DOWN WHEN YOU MOVED IT ? THEY DO NOT LIKE THAT IF YOU DID AND NEED TO STAND UPRIGHT FOR AT LEAST 24 HOURS AFTER SO OIL CAN DRAIN BACK TO THE COMPRESSOR .IF YOU TRIES RUNNING IT VERY LONG AFTER YOU CAN PLAN ON REPLACING IT AS YOU BURNT UP THE COMPRESSOR

LG Refrigerators | Answered 2 days ago


We had the same problem so I soaked up the water with kitchen towel then I poked a straw down the hole. Don't use anything sharp as not sure what you might damage. then I cut up a plastic egg box and used two adjoining cups and put one over the hole and the other ond is against the back which stops the ond over the hole moving and that's that, hope it works for you.

Refrigerators | Answered 2 days ago


One thing it could be is that the water solenoid not closing completely. Water drips from fill tube into icemaker and freezes, not allowing any water to get through. This is fairly common and with a couple of tools, you might be able to fix it yourself if you're handy. Could be other causes too, this is the one i'm familiar with.
UPDATE> If the water filler tube that empties into the tray is frozen solid, then it;s probably the water solenoid (not shutting off).. And you want to avoid cycling the system (the heating element coming on) without water in the tray. That's what i saw in a video. Hope that helps.

Kenmore... | Answered 2 days ago


Great advice from medeer, I had the same ER DH error code, and my refrigerator began to warm up. I replaced the defrost thermostat assembly part # 6615JB2005H which is located inside the freezer, on the right side behind the white plastic panel. I accessed it by removing the freezer door, all components inside the freezer, and the tracks mounted on the sides of the freezer. Be careful when removing the white panel because a fan is mounted to the left side of the white panel and plugs into the back left side of the freezer compartment.
Found the green technical data sheets under the refrigerator in a small plastic bag near the front.
My refrigerator is 20 months old, just a few months past the warrentee,

Kenmore Elite... | Answered 2 days ago


use buttons or the dial .we have no clue as to what you have

Refrigerators | Answered 3 days ago


go buy a new one

Amana... | Answered 3 days ago


It appears that the defrost cycle is stuck in the on position. You can locate the defrost timer on most refrigerators and manually cycle them. It is not uncommon for them to fail. You should have a qualified technician do the repair.

GE Refrigerators | Answered 3 days ago

Not finding what you are looking for?
Refrigerators Logo

171,795 questions posted

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers

Gil Shultz

Level 3 Expert

3382 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...