Lands Phones - Recent Questions, Troubleshooting & Support


Request the driver from Panasonic.

Panasonic... | Answered 2 days ago


Do you mean the Panasonic KX-TGA470 handset? The KX-TGA470 handset is the included handset for several models of Panasonic cordless phone systems, including the KX-TG7732. When the ringer is off, the handset should show a bell with a line through it. To adjust the ring volume, press Menu on that handset when the phone is in standby. (The base and handsets are not in use.) After pressing the Menu button, type # 1 6 0. (Alternatively, use the arrow keys to navigate to Initial Settings and press the soft key for Select. Navigate to Ringer Settings and press Select again. Go to Ringer Volume Handset and press Select once more.) Use the arrow keys to select a value between 0 and 7. 0 will keep the ringer disabled. Press the soft key for Save. Press Off to exit the menu.

You can also adjust the ringer volume on that handset by pressing the Volume Up key while the phone is ringing at the base and other handsets. You can adjust the base ringer volume by pressing the + or - keys when the phone is ringing. Alternatively, press Menu # * 1 6 0 from any handset. Note: this phone system also has a silent mode. Press Menu # 2 3 8 to enable or disable the feature. When this is enabled, the handset will show an icon with several Z's.

You can find the manual on the phone system page: https://shop.panasonic.com/support-only/KX-TG7732S.html . The current link to the manual is ftp://ftp.panasonic.com/telephone/om/kx-tg7731_mul_om.pdf . See pages 23 and 35 for the ringer volume adjustment. See pages 35 and 40 for information on the silent mode.

I hope this helps.

Cindy Wells

Lands Phones | Answered 3 days ago


Google (ats)(5013b)(manual) without parens OR contact ATS directly to request the manual.

ATS Lands Phones | Answered on Oct 14, 2019


FOLLOW this link http://forum.gsmhosting.com/vbb/f550/how-remove-security-code-nokia-x2-step-step-guide-1139563/

Nokia Lands... | Answered on Oct 12, 2019


Press # when handset is not in use and hold for several seconds. Repeat on any other handset experiencing problem. Do not disturb will be off and phone will ring.

Uniden Cordless... | Answered on Oct 11, 2019


Hi , The phones which keep saying Register mean that they have lost the coding for the Base. To re-code them all you do is
press the menu button,
Press down Button 3 times until Setting comes on the screen,
Press the Button Phone/Ok,
The Display should display HANDSET SETTING,
Press the Button Phone/Ok ,
Then Press the Down button about 4 times until Register Comes on the screen,
Press the Button Phone/Ok,
Enter Base pin ( 0000 )
The Display will show REGISTER IN PROGRESS,
then immediatly press the Handset Locator Button on the Base and hold it in until you hear a tone.

Thats it , the screen should display Register Done.

Lands Phones | Answered on Oct 10, 2019

Not finding what you are looking for?
Lands Phones Logo

79,286 questions posted

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6030 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...