Humidifiers - Recent Questions, Troubleshooting & Support


fixya doesnt sell parts for anything

Humidifiers | Answered Yesterday


Thank you for your question. I can understand your concern about this error code. This code indicates the sensor has failed. However, if the touch pad is not responding it can also be causing this code to appear. If the touch pad does respond properly, the sensor # 610.14 will need to be replaced. The sensor is available at

searspartsdirect.com/partsdirect/part-number/610.14/0046/461?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=610.14&sid=MMLxexpertxmerch

and sells for $2.16. You can call 1-800-469-4663 and someone there may be able to assist you with the cost of the service call and the technician will be able to give you an estimate for the repair. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further

Kenmore... | Answered on Apr 10, 2019


After replacing the Water Panel, turn the control knob to the “Test/Reset” position until the “Change Water Panel” light blinks to reset the Water Panel change indicator timer.

Humidifiers | Answered on Apr 09, 2019


You need to check to make sure the condenser fan is blowing and that the condenser coil is clean. You absorb heat inside the refrigerator, compress that heat with the compressor, then expel the heat at the condenser (the part of the system that blows hot air). If you can't expel that heat, the unit will lock itself out until you reset it

Humidifiers | Answered on Mar 30, 2019


if possible try and check the lines or hoses that run from the wat er supply to the point where the steam comes out. It is very possible that the lines are clogged with water deposits. Thats why most of the time they suggest that you use distilled water in your vaporizer. hop this helps.
Lynn

Vicks... | Answered on Mar 22, 2019


I DON;T KNOW. MOST WATER IS LET IN WHEN NEEDED BY FLOAT VALVE AT BOTTOM OF BOTTLE OR LOWER.
PERHAPS IT NEEDS CLEANING. CONSIDER USING
STRAIGHT VINEGAR IN LEAKING SIDE THEN GOOD SIDE. IF NOT OK, YOU MAY HAVE TO TAKE UNIT APART TO INSPECT FOR CAUSE.

Humidifiers | Answered on Mar 20, 2019


https://tadanoamerica.com/dealers


If anyone using Fixya is searching, this is a link to dealer phone numbers in the United States to request.

Humidifiers | Answered on Mar 15, 2019


On the fan will be a model number. Ebay will be your best bet. Enter numbers into search bar.

Crane... | Answered on Mar 13, 2019


If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/

Fisher Paykel... | Answered on Mar 11, 2019


You have a short in there and that accounts for the tripping circuit breaker. If the insulation on the heating coil has gone that could be a good reason for the issue. Open it up and look for the short.

Vicks Warm Steam... | Answered on Mar 10, 2019

Not finding what you are looking for?
Humidifiers Logo

5,224 questions posted

Ask a Question

Usually answered in minutes!

Top Humidifiers Experts

Paul Carew

Level 3 Expert

3416 Answers

Dennis Webber

Level 3 Expert

411 Answers

Marvin
Marvin

Level 3 Expert

84543 Answers

Are you a Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...