Hardware & Accessories - Recent Questions, Troubleshooting & Support

Google (woods)(2023)(manual) without parens.

Woods Hardware &... | Answered Yesterday

has three articles on the 'download' tab, I guess the user instructions would be the one you need?

Hardware &... | Answered 2 days ago

Google (intermatic)(et70415cr)(manual) without parens for instructions.

Intermatic... | Answered on Apr 18, 2019

Google search revealed the following - "The 2800 is rated at 10.6 VDC, 8.5 VA which translates to 1.25 amps",
which is rather confusing as VA for practical purposes is the wattage (of the output) and 10.6 volts at 1.25 amps is wattage of 13.25 while the quoted VA of 8.5 suggests a current of only about 0.8 amps is available which I think is somewhat unrealistic. This is presumably for each output...

Hardware &... | Answered on Apr 17, 2019

more details please... What device... any more info? Stephen

Hardware &... | Answered on Apr 16, 2019

Probably more help if you provided the full model number.

The programming manual says you can set this in code 82 START. Probably data code 1 is what you want, but look at some of the other codes provided and the parameters that affect them.

If you need additional information, call TB WOODS at their handy number: 888-829-6637.

Woods Hardware &... | Answered on Apr 10, 2019

Somewhat cryptic instructions from Rhine are available here:


You may want to download the PDF for easier reading.
Just for grins, be sure all the little DIP switches still match.

What may have happened is that you've pushed the 'TIMER' button and it's gotten stuck; rock it sideways and see if that fixes the holdup. There might be something under the membrane that is sticking it down, too, but that is less likely.

Manual appears to be saying that you press 'TIMER' and then use the up and down arrows to set a time. Does not indicate that you have to push anything after you have selected an hour value.

Hardware &... | Answered on Apr 10, 2019

Cross-reference to this is Intermatic ODT-309 or DT-309
See if this gets you anywhere:


Hardware &... | Answered on Apr 10, 2019

There is a range of answers on fixya for this question already, and some of the links provided, for example
may help you find an applicable set of instructions.

It appears the company that makes these doesn't have a formal Web presence, and recommends 'you contact the place of purchase' for help (or support material) if you need it. The owner's manual ... if you can find it ... had an 800 number to call for advice; I've had no luck in finding an online copy or even a link containing it, but you might Google if desperate.
From what I see, you press the up arrow until something like "Prog 1" is displayed, then set days and times following prompts. This is similar to many designs of home 'smart thermostat' and perhaps uses the same control logic.

Aube... | Answered on Apr 10, 2019

This has actually been addressed on fixya at least once.

Believe it or not, there's a site that provides manuals for these things, and they have a multilingual PDF of the generic instructions for the series:


Be sure to start by resetting the device with a pen-point or similar tool; the switch is at lower right of the front panel. Programming instructions are too complicated and specific to type here; download and read the manual.

Hardware &... | Answered on Apr 10, 2019

This ought to be a Harbor Freight product (#40148) and here is their manual for it:


Rotate the dial, clockwise only, until the time printed on the dial lines up with the arrow.

Electric... | Answered on Apr 10, 2019

Not finding what you are looking for?
Hardware & Accessories Logo

14,150 questions posted

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5353 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Brad Brown

Level 3 Expert

18031 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides