Floor Polishers & Buffers - Answered Questions & Fixed Issues


The switch has gone bad. Very common on these. The contacts in the switch wear out and then get welded together. The motor draws a lot of power when first started and this is ******* the switch.

Mercury Floor... | Answered on Jun 28, 2019 | 1,033 views


Any janitorial supply in your town, or ebay. Your Home Depot or Lowe's may have them as well as Amazon.

Floor Polishers... | Answered on Jun 28, 2019 | 863 views


The rectifier is in the top end of the motor. Take the cover off and then the top end plate of the motor. With the bolts removed, you will have to tap and rock the plate to evenly remove it. Carefully look at the marks on the old and new part to be shur you do not make a mistake in the wiring. A drawing and photo might be nice too.

Floor Polishers... | Answered on Jun 28, 2019 | 639 views


Use your volt meter to test the battery voltage. It should be at least 12.4v . I this is good, follow the voltage through the ignition switch and the relay if it has one, on to the starter. If you have power on to the starter, but still no crank, the starter is bad.
Hope this helps, Robert

Eagle Propane... | Answered on Oct 31, 2018 | 660 views


What exactly is the question here?

Is this a corded electric Scrubber or a battery one?

Floor Polishers... | Answered on Dec 27, 2016 | 1,027 views


Timber Floor Sanding and Polishing Melbourne

Use this guy, i have used them before & they are very affordable & professionals for sure

Floor Polishers... | Answered on Mar 29, 2016 | 966 views


The manual for the Electrolux B-8 Shampooer has just been uploaded.

Electrolux Floor... | Answered on Mar 07, 2018 | 1,669 views


These are specially made with to suit the particular requirement and there is no way but to get this replacement from the manufacturer. the other way out is to use the two remaining ones on either sides for a brighter light and use 10" pipes of PVC or transparent tubings to give a special shade. Check this out with the availability at a plumbing store. You can cut portions on the opaque shade and use acrylic pieces to be stuck within to give an art look.

Pier 1 Imports... | Answered on Jul 12, 2015 | 1,674 views


The connectors are that thick the cable is thin.

Perfect Vision... | Answered on Sep 24, 2014 | 868 views


Other than design differences tension settings are much the same.
Check out these videos and you will probably find your answer.
sewing machine tension YouTube

Janome 1600P-QC... | Answered on Jan 28, 2015 | 1,274 views


motor bearing worn or shaft bent.

Floor Polishers... | Answered on Aug 10, 2014 | 705 views


https://www.kenteuroclean.com/service/manualspartslists.aspx

Euroclean Kent... | Answered on Aug 10, 2014 | 661 views


www.clarkeus.com

Clarke 56382453... | Answered on Aug 10, 2014 | 604 views


www.clarkeus.com

Clarke Propane... | Answered on Aug 10, 2014 | 749 views


www.floorequipmentparts.com

Reckitt... | Answered on Aug 10, 2014 | 468 views


Wax remover. Rewax spot after removing wax.

Floor Polishers... | Answered on Aug 10, 2014 | 441 views


www.clarkeus.com

Clarke Focus II... | Answered on Aug 10, 2014 | 986 views

Not finding what you are looking for?
Floor Polishers & Buffers Logo

Ask a Question

Usually answered in minutes!

Top Floor Polishers & Buffers Experts

Robert Wooley
Robert Wooley

Level 2 Expert

177 Answers

JC Meredith
JC Meredith

Level 2 Expert

168 Answers

Wayne Dahl

Level 1 Expert

6 Answers

Are you a Floor Polisher and Buffer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...