Computers & Internet - Recent Questions, Troubleshooting & Support


notify google for assistance

Computers &... | Answered 37 minutes ago


http://www.swiftcodesdb.com/details/capitec-bank-limited-CABLZAJJ

Sorry, no iban codes per Capitec.

Quoting Capitec from a Google.com search:

"South Africa does not use IBAN numbers but if the sending bank insists on an IBAN number, you can use your Capitec Bank account number (e.g. 1234567890) and the Capitec Bank branch code (always 470010) to create a number that can be used as a substitute for the IBAN."

https://www.capitecbank.co.za/bankbetterlivebetter/articles/foreign-exchange-services

Swift Computers... | Answered 2 hours ago


that means the unstated OS is corrupted or HDd bad, we test HDD first. wana learn? that silly repair toy only works if above 2 lines are false. ok so is a toy to make Sales pitches cute

Toshiba... | Answered 3 hours ago


old post but not too old
run on AC pack only
test the hdd first
reload the unstated OS?
or is simply overheating
why not get it fixed in a shop?

Toshiba... | Answered 3 hours ago


old post and NO OS stated.
is this it the true name>? must said first as fixya does not have all 10,000 names for acer PCs here. so must be said first.

Acer eMachines E725-4520 Notebook (the dash matters)
acer both them and gateway and packard bell long ago.
2009 made states your manual.

runnng VISTA , unstated by you and IS KEY fact ? what OS?

ok lines are 2 reasons,
1: overheated PC. ever clean it in last decade? fully, all vent paths all.
2: bad LCD, 2008 bad GPU, sold by many. then., all bad.

if this is your GPU it is ok. but nVidia 2008, is no good. Intel GMA 4500M
your GPU is this, if you told last 4 digit of model correctly 4520

Acer eMachines... | Answered 3 hours ago


tad older post but not too old, and ignored.
it's an old monitor lucky you it works at all,
after all most are dead now, 99%
15 years old today.
if the OSD is dead under 10second from, power on
the Montors CCFL tubes are dead.
the fail these ways
1: dead for ever.
2: work intermitantly (you)
3:Strobe.
4: only 1/2 screen dead, (2 tube displays)
5; turn yellow, for white
6: dim, for ver.

never seen any 15 year old CCFL screens good.
not me unless parked on self for 10 years.
the clue is on last page, in your manual, the word "
mercury Hg toxic, it's there)
the cure is 2010 or newer monitors with LED back lamps
do that now, end the pain of #1 soon to happen.

Acer AL1912 19"... | Answered 4 hours ago


we can not tell what you can do ever. (be god like that) but we tell you to ask on acer forum. we are not acer. or how test it, do you want to learn testing? that it. no shops in town to fix this PC? NO PC stated (OF 10,000 MODELS) NO OS state so no answers possible. (but generic) Fast boot is w10, so turn off fastboot that causes windows to load fresh, and clean. do that is many ways, here is alist in my PC it is also in the BIOS pages too.. fast boot. BASICALLY WE GO TO SAFE MODE. w10 made this hard to do, F8 key is now dead.for w10 just for funs and giggles they did that. but SAFE boot is still valid. the PC can have a bad HDD, we test it first, ask how, with smart app' then try to do the recovery mode. http://www.pcdied.com/BSOD-s/W10-DEAD.html
the PC has strick 3 your out mode, boot 3 times and on 3rd failure you see the windows recovery mode POP the silly blue screens click set advanced options click startup settings click enable safe mode, and click restart

Acer Computers &... | Answered 4 hours ago


old post, doing all 2018,
that is NOT the full model number, why post lacking that
or what OS you run ,windows, what?
ok windows login works, but what is a TILE?
ok this is simple really, you slammed the OS some way.
that means changed OS in wrong way.
NO OS stated, but now the video driver is WRONG
my guess is the resolution is in safe ,mode 800.600 and sure
is no good for most apps. sure.
not known the real name of this PC means I have to look them up backwards at acer.com, a real pain that is.
ok, me fooling about on ebay, it is and
Acer Aspire One AOA150 (for sure)
it came new with XP ONLY, so still running XP the virus magnet
that it?
here it is, click vga and load that.
if you upgraded to Vista or newer this will fail\
click control panel then click system
BINGO your OS is told to you, now , never post
computers questions lacking that KEY FACT, or answers will be wrong or ignored just like this one was for 12 months.


https://www.acer.com/ac/en/US/content/support-product/61?b=1

Acer Computer... | Answered 4 hours ago


Hi,

The notebook model you have is shipped with the Synaptics touchpad driver. Please follow the below steps to enable scrolling features:

1. Open Control panel -> click on Mouse . It will display Mouse Properties dialog box.
2. Under Mouse properties Window click the Device Settings tab
3. Click on Device Settings -> Settings button. This will display the Properties for Synaptics TouchPad on PS/2 port.

4. Follow the steps below to enable the Tapping Feature :

Highlight Tapping in the Left hand side , and Check the Enable tapping in the Right hand box .

5. Follow the steps below to enable Scroll feature:

Highlight Virtual Scrolling in the Left hand side and Check both the boxes in the right hand side.
6. Click OK .
Alternatively you can anble scrolling by reinstalling touchpad driver.

Touchpad driver for Vista:

ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39534.exe

Touchpad driver for Windows 7:

ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe

Compaq Presario... | Answered 4 hours ago


wow photos, nobody does them , nice.
no HP PC stated, but is w10
sanyo is projection system.
NEW HDD means w10 was loaded fresh sure.
so load there software
what was the OS before the ***** of HDD< ?
sure go to sanyo and get the applications, for w10
only sanyo supports that projector no body else.
its it connected with VGA?
it only connects these ways for sure

  • RCA Type x 4 (Video, Y, Pb/Cb, Pr/Cr) composite.
  • and Mini DIN 4 pin x 1 (S-Video)
  • (VGA) HDB 15 Terminal x 1
what PC you have unstated.
nor what cables you use from proj. to PC stated.
but you do need the sanyo application from them.

ok, im reading your manual
so that screen above is not window but is sanyo only menu.

my guess is you lost the manual here

https://www.manualslib.com/manual/682648/Sanyo-Plv-Z1.html?page=22#manual

has service modes and more.
or read here.

http://ixbtlabs.com/articles2/sanyo-z1/index.html

a you set to user mode (limited or full mode.?
IDK now to reset this projector but it may need that too.
the books says...
There is also a hole with the RESET button. rear

HP Computers &... | Answered 4 hours ago


old post but the F20 has CCFL lamps and all are dead now
if used 10hr/day for 5 year they die, all do that.
if the flashlight test passes (see data on screen with Menu button pressed over and over the CCFL tubes died.
buy a LCD monitor 2010 or newer and with LED
end the pain of CCFL now. like most have now./

it is at least 12 years old today, amazon reviews
the silly book on it has no date (very rare that)
2006 is OLD!

Acer Ferrari... | Answered 4 hours ago


great, and is common , for sure, old and sure drink spills
and for sure used keyboards off fleabay, sure.
really think of the abuse on any keyboard, endless.

Acer Computers &... | Answered 4 hours ago

Not finding what you are looking for?
Computers & Internet Logo

1,506,480 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...