Question about Washing Machines
Verify that BOTH water hoses are hooked up correctly and turned on. What happens is the hoses get hooked up backwards, sometimes... then dad gets a big hot water bill and turns off the hot water (which is hooked up to the cold inlet)...When the machine needs cold water, it turns on that water valve and no water flow because hose source is turned off.
Posted on Mar 29, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: GE Washer top-load WLDSR416FOWC
If your washer won't spin, check these:
It doesn't pump or spin
It pumps, but doesn't spin
It spins only with the lid closed
It doesn't pump or spin If it doesn't pump water out or spin, check to see if the motor is running, then proceed as follows:
Posted on Jul 23, 2008
The ge wcxr1070t uses a coupling under the agitator . There is a cap on the top pop it off and remove the screw if you see one , otherwise just pull up , the coupling is under the agitator check to see if it is stripped . dr fixit in the repair service directory will have it if bad
Posted on Dec 15, 2008
most likely cuase would be the inlet valve
you would need the complete model number to make sure you get the right part for that unit.
Posted on Feb 24, 2009
LF = Long Fill
LF flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged the basket but control does not detect a water level change.
Is water supply connected and turned on?
Are hose screens plugged?
Is water entering the tub? If so check pressure hose connection to machine/motor control.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 07, 2010
Testimonial: "We followed your suggestion and disconnected the hoses and they had "gunk" in them. We flushed them out, reconnected and everything seems to be fine."
Tips for a great answer:
May 14, 2018 | LG Washing Machines
Nov 25, 2010 | Whirlpool WTW6600SW Top Load
Sep 07, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Mar 20, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Mar 13, 2010 | Fisher and Paykel GWL11 Top Load Washer
Aug 23, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...
Jul 18, 2009 | Maytag Bravos MTW6600T Top Load Washer
Jul 13, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Mar 27, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...
Oct 21, 2019 | Samsung Washing Machines
460 people viewed this question
Usually answered in minutes!