Question about Washing Machines
I had a little bolt get under our drum and I had to work on it to get it out. One of the men put a bolt in his pocket and did not remove it.Could even be a small stone.
Posted on Feb 13, 2019
BEARING DO WEAR OUT CALL A LOCAL REPAIR SERVICE
Posted on Feb 13, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This sounds like the min bearings have gone, open the door and see if there is any play up and down on the drum. if so its the bearing if not it could be something that has fallen from a pocket and got stuck between the metal clothes drum and the oute drum casing. a take apart job i am afraid for both issues.
Posted on Feb 18, 2007
SOURCE: grinding noise when drum rotates
may be a foreign object trapped in between the inner and outer tub. Major Disassembly required to split the outer tub. May also be the rear bearing in which case back half will have to be replaced.
Posted on Oct 04, 2007
If the rear bearing is bad it will require the replacement of the entire rear tub shell. This is because the bearing is molded into the plastic and cannot be replaced separately (I know, its a stupid design). Sometimes additional damage can occur and the inner spin basket and front shell may also need replaced. In addition, what may seem like a bad rear bearing, might be a broken tub support on the spin basket. In a nutshell, you may have to replace both tub shells and spin basket at a minimum. With parts and labor the repairs could cost $600-$800. If you have no extended warranty or service plan coverage, it may not be worth the effort to repair due to the excessive cost. Sorry...I wish I had better news for you. I hopes this provides you with some answers.
Posted on Oct 06, 2007
If youve made sure that its not a roller thats dry or a belt idler pulley that dry,than yes its the motor,and oiling that will only make it worse.
Posted on May 21, 2008
I also have the same problem as klrlesimmons, exactly as described. Sounds like sand is rubbing as the drum turns, and also sounds out of balance.
Repairmen replaced upper and lower glides and also the plastic bearing but not the entire bearing assembly.
Frigidaire Gallery, Model Number 417.49012890
Posted on Nov 02, 2010
Tips for a great answer:
Feb 02, 2014 | Zanussi Washing Machines
Nov 06, 2017 | Zanussi ZWF1420W Front Load Washer
Oct 11, 2009 | Zanussi ZWD1470W Front Load Washer / Dryer
Aug 12, 2009 | Zanussi F1045W Front Load Washer
May 18, 2009 | GE WJSE3110A Top Load Washer
Jul 12, 2008 | Zanussi WJS1265W Front Load Washer/Dryer
Jun 19, 2008 | Zanussi ZWF1430W Front Load Washer
Feb 20, 2019 | Samsung Washing Machines
31 people viewed this question
Usually answered in minutes!