Question about Dometic Refrigerators

Open Question

Error 51 flashing not starting on gas dometic 3way has automatic mode

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dometic 3way fridge model RM2350R. the fridge works ok, but when i run it on gas the flame lights first time, but the flame indicater does not work,the thermocuple has the right ajustment,is clean,wh


The flame indicator works on very low voltages from electricity generated via the thermocouple. Check the connections and if OK, I would say you are correct in assuming the indicator has failed. These are very sensitive and a bit of a knock can damage them. Try Dometic or Electrolux for a replacement indicator.

Nov 21, 2014 | Dometic Refrigerators

1 Answer

My camper has a dometic RM2652 refrig. the electric works, but it won't transfer to butane


Most dometic refrigerator have a button you need to push when you shift the mode switch to gas. This button holds the gas valve open until the thermopile generates enough power to hold the valve open. So on most shift the mode switch to gas, hold the button until the flashing light goes out. The flashing light indicates the gas valve is energized and the unit has shifted to gas mode. Depending on when the unit was last used it may take up to 5 minutes for the gas supply to purge the gas lines to the refrigerator. So be patient.
Hope this helps.

Oct 15, 2014 | Dometic RM2652 Refrigerator

1 Answer

How do i switch from gas to electric?


Press the automatic mode switch on the upper control board to turn the automatic mode off. This will place the unit into LP operation.

Jun 24, 2014 | Dometic RM2652 Refrigerator

1 Answer

Rm4400 freezer working fridge not


move temp sensor that's mounted in coils down or let hang if same replace sensor

Jan 19, 2014 | Dometic Refrigerators

1 Answer

We have a Dometic 3way fridge, the gas stayes lit only as long as I hold the button.


It appears that you have a bad thermocouple. This senses the heat and should allow the gas valve to stay open after the flame has been lit for approximately 30 seconds. By pushing the button you are manually opening the valve. Check to make sure the thermocouple is resting in the flame and is getting the proper heat.

Jan 21, 2013 | Dometic Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dometic Refrigerators Experts

Sheldon Dedek

Level 3 Expert

906 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Are you a Dometic Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...