Question about Konica Minolta Office Equipment & Supplies

Open Question

Konica Minolta AccurioPress C2060 with Fiery ES IC-417 PS1.OUS. Fiery will not connect

It turns out the hard drive was defective and was replaced. Thanks for your suggestions

Posted by on


6 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 16 Answers

SOURCE: Konica Minolta magicolor 2430DL

Open the top cover. Remove the drum (part with long green handle). Below the drum you will see a strip of glass about 4-5 inches long. Take a cloth and wipe across the glass.

This will normally clear up any white lines in your print.

Posted on Jul 19, 2008

  • 118 Answers

SOURCE: Konica Minolta Magicolor 2400W drum cartrige-how to replace?

Did you buy a whole new drum unit, or just change the cartridge? If so, the fuse may still be blown. Also, you may need to empty the spent toner out of the old cartridge.

Posted on Nov 18, 2008


You have to connect it to exactly the same USB port. For every time you connected to a different port compared with the last one, a new copy will be installed.

Chip reset device for Konica Minolta Bizhub and CF imaging units

Posted on Aug 23, 2009

  • 13 Answers

SOURCE: Reset Chip on Konica Minolta 8031 Imaging Unit

I can provide you with a programmer to reset the chip. They are only about $500-$700. Still interested?

Posted on Sep 13, 2009

  • 830 Answers

SOURCE: Is there any download for

Click on download the complete user guide.

Drivers and software:

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Hard disk drive problem
The hard disk cannot be accessed

the main PWB and the connector on the
hard disk. Repair or replace if necessary.
Defective hard
Run U024 (HDD formatting) without turning
the power off to initialize the hard disk.
Replace the hard disk drive and check for
correct operation if the problem is still
detected after initialization.
Defective main
Replace the main PWB and check for correct

Apr 17, 2014 | Kyocera Mita Km 3035, 4035, 5035 Fs9120dn,...

1 Answer

If i connect my external hard drive. the windows can't detect and it will say "USB Not Recognize" and my desktop will hanging.

Good can try replacing the usb cable or but still not working your hard disk was defective..thanks

Aug 16, 2011 | Toshiba Computers & Internet

1 Answer

One minute it was working fine, the next it was a black screen with the cursor blinking in the upper left corner. I tried re-booting it, but it just goes back to the black screen with blinking cursor. Any...

Are you getting the Acer logo on start up? If so you might have a software issue on the hard drive, or the hard drive itself is defective. I suggest using your recovery disc to re-install windows and drivers providing you have them.

Dec 18, 2010 | Acer Aspire One PC Notebook

1 Answer

My WD 1tb drive has been working fine for a few months. All of a sudden it is not an icon on the desktop and It is not registered as a drive in my computer. I can still open the wd backup restore page but...

Here is one or more issues with this drive.

1. The AC adapter could be the main reason
2. The USB to SATA controller inside also can be the issue.

What you want to do to make sure the adepter is not the cause:

1. You can order a adepter off

Now most of these drives did come with USB to ethernet defects and what you can do to save the drive is take it out of the current case. You can order a external case and put it into that.

you can also take the SATA drive out and put it into your computer and recover the data for it.

Now Western digital has a 3 year warranty for these types of defects. Now if you are looking into a replacement drive I would suggest you contact them I will give you there RMA information

To have the drive replaced follow the url below:

Thanks, I hope this does help.

Btw, I’m available to help over the phone in case u need at

Oct 28, 2010 | Western Digital MY BOOK HOME 1TB EXT...

2 Answers


Disk error hints that you are missing OS (Operating System) such as Windows. Which can be caused by several reasons: defective HD controller, defective hard drive, damaged partition, corrupt MBR, etc.

The clicking noise is an indication, your hard drive is trying to spin the motor to either spin the drive cylinder or to move the head. In can be normal or it can be damaged.

Try booting from Windows CD/DVD or Hiren, then try to access the drive. If you are unable to access the drive after booting from CD/DVD, then try to format it. And if still unsuccessful, then you have defective hard drive and will need to be replaced.

Jun 10, 2010 | Toshiba Satellite M35X-S311 Notebook

1 Answer

Turns on, flashing light, 2 different laptops dont register it (dell and toshiba, both 2 yrs old), clicks every 3/4 second...

It sounds like the HDD has become defective. This is quite common as they are mechanical devices with moving parts. If it is still within it's warranty period I suggest you return for a replacement.
Hope this helps,

Jun 09, 2010 | Verbatim 500GB USB Desktop 500 GB Hard...

1 Answer

I'm trying to install Windows Vista on a new hard drive. While installing, an error comes up (0x800706F8) and I cannot complete installation of Vista. I'm on a Gateway MT6711 which is equipped with a...

This problem may occur if the DVD drive's firmware is either out of date or defective.

Check the link given below for detail information:

To resolve this issue, obtain the appropriate firmware update for the computer's DVD drive.

Good Luck!!!!!!!!!!!!!!!!!!!!

Sep 06, 2009 | Gateway Computers & Internet

1 Answer

Maxtor OneTouch 200 won't power on.

Sounds like one of two possible problems: Either your power supply is defective from the factory and is incapable of supplying enough power to properly operate the drive, Or the drive has a short in it and is drawing excessive power beyond the capabilities of the power supply. The easiest way that i can think of to test which it would be is to acquire another supply that provided the same voltage and current as the one you have, with the same type plug on it, that's wired with the same polarity. Common 'wall warts' that you may have around the house should be capable of fitting this bill, and if not, you can pick one such supply up at a retail store such as radio shack. IF the 'new' supply fails to turn the drive on, Then the drive is defective. If it does turn the drive on, Then the supply is defective.

Nov 30, 2007 | Maxtor Personal Storage 3200 (U01E200) 200...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides