Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

Hi all. I've been having a problem with my bizhub c554e that i've been working on. which is when i change the drum core (K) and also the drum blade, the printing for (K) became not satisfiable. which is then i check the developer unit (K) there are some developer that've been spill out a bit at the front. and also i'm having a problem with the gradation setting, i can't do the gradation setting at service mode. does the parts such as drum core, drum blade, itb, itb blade from c364 fittable to c554e?? hope you guys can share on how to solve the problems. tq

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,850 Answers

Black drum for the 554e is the same as the c364. Replace the drum as OEM not third party and DONT do it your self replace the whole drum from a Konicaminolta and the developer unit also

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Posted on May 28, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
jqsababa967
  • 145 Answers

SOURCE: Konica 7022 F-26-3/2 L detect 0004 Konica 7022

Details Subject:
Background, overtoning, and/or F26-x codes.
Description:
Background, overtoning, and/or F26-x codes.
Solution:
PROBABLE CAUSES:
1. Overtoned developer.
Install fresh developer (PCUA 950237) and run the L-detect adjustment. To run the L-detect adjustment, perform the following:
a. Enter the 36 mode (power the copier ON while pressing the 3 and 6 keys).
b. Press [1. HV adjustment].
c. Press [Next] several times until the display reads [HV adj (L detection adj)].
d. Press [Start].
e. When the adjustment is complete, the machine will stop and a value is displayed in [RESULT].
f. If the developer was sampled properly during the L-detect adjustment, the value displayed in [RESULT] will be in the 60-75 range.
g. If the L-detect adjustment [RESULT] value is outside of the 60-75 range, than the TDS (toner density sensor) should be checked.

2. Failed TDS (toner density sensor).
To check the TDS, perform the following:
a. Remove the IP unit (if an IP unit is installed).
b. Remove the rear and left rear side cover.
c. Remove the board cover/D (p/n 26NA73280) for access to the PRDB.
d. Enter the 36 mode (turn the machine ON, while pressing the 3 and 6 keys).
e. Select [1. HV adjustment].
f. Press [NEXT] several times until the display reads [HV adj. (Toner auto supply)].
g. Locate TP14 (TDS AN) in the middle of the PRDB above CN 25.
h. Using a voltmeter (20V DC range), place the red meter lead on TP14 and the black meter lead to frame ground.
i. Press the START button on the control panel.
j. The analog voltage reading on the volt meter during sampling should be (with properly toned developer) between 1.2 and 2.0VDC. If the voltage reaches 2.0VDC, M4 (toner addition motor) will turn on and add toner. When the toner auto supply adjustment is finished the voltage should read approximately 1.8VDC.
k. If the voltage reading is not within this range, replace the developer (PCUA 950237), TDS (p/n 26NA88040) and run the l-detect adjustment while monitoring TP14 on the PRDB.

3. Failed write unit (the TCSB monitors dot pattern patches created on the drum and adjusts the laser output for Maximum Power Control).
If developer has been replaced, L-detect run, the TDS voltage checks, and the developer is still overtoning (M4 continuously adds toner), replace the write unit (p/n 26NA-6503).

4. Clogged machine filters.
Check all machine filters to verify they are not clogged. Clogged cooling fan filters prevent proper ventilation which can cause the adhesive on the write unit glass cleaner to melt due to high internal temperature, causing smears on the glass.
Note: Information provided by Matthew Kennedy, Perry Corporation.
SPECIAL NOTE: Solution contribution by Don St. Onge, Workgroup/SSD

Attachments:this is additional information on f-26-2
and i have given you info on f-26-3
you should revue all the information
hope that helps

Posted on Oct 14, 2008

  • 1 Answer

SOURCE: OKI B6300 Drum problem

Hello, com_jedi. I would suggest you contact the OKI Customer Support line in order to address this issue. The phone number is 1-800-654-3282 (800-OKIDATA). For your model unit you would hit options 1 then 4 to get to mono support.

It is possible that you purchased a defective consumable and OKI warranties them for 90 after the date of purchase. If this is a new drum/toner it may need to be replaced to determine if it was a bad chip in the cartridge or if there is some other issue with the unit that is causing the error.

It is also possible there is a misalignment with the sensor that is located under the drum unit. A support tech can walk you through the troublehshooting as it would be a bit difficult to do here.

I hope this helps!

Posted on Feb 12, 2009

  • 30 Answers

SOURCE: why my Fuji Xerox C525A color lazer printer print out not clear?

hi,clean corotron wires,drum unit & mirrors.send me result.
thank you.

Posted on Jun 08, 2009

SOURCE: Our bizhub-250 receives a C2557, need help with service mode

Utility/Counter -> Details -> [STOP][0][0][STOP][0][1]
Go to counter and clear the life of the developer and drums and then run F8 from functions.

Reset your Toners and Imaging units for Minolta Bizhub and CF series.
http://www.chipreset.eu

Posted on Sep 03, 2009

  • 140 Answers

SOURCE: copy on canon ir400 copier

when you reset RAM the by default setting will be chang. try to get setting back.

Posted on Apr 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I rest a drum on konica minolta C554e


Then the drum you replace is not new there is a chip on it which tell the copier its new

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Feb 27, 2018 | Konica Minolta Office Equipment & Supplies

1 Answer

Bizhub c554e error code c4801


MFP detects simultaneous replacement of multiple boards. YOU REPLACED board and did not follow the service manual


Do not replace the printer control board and the SSD board at the same time. The backup data is lost and image failure may be
caused.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Dec 06, 2016 | Konica Minolta Bizhub C554 Color Copier /...

1 Answer

How do I fix trouble code c- 0204 on my bizhub C554e Photocopier machine?


Tray 2 feeder up/down abnormality.The paper feed tray 2 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.Check the sensor and the sensor actuatos.

Jul 14, 2014 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Bizhub 363 how to change developer unit


Requires having developer, drum, and cleaning blade already purchased. You will be taking the current cartridge apart and replacing the wore out parts then conducting required test, but before that it will require a drum dry procedure and counters to be cleared.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Mar 13, 2013 | Konica Minolta Bizhub 363 Copier / Printer...

1 Answer

MAINTANANCE M2 MINOLTA BIZHUB 163


Need to have the drum and developer and cleaning blade replaced, then have that M2 counter reset. Resetting the counter with out replacing the drum developer and cleaning blade will cause codes and image problems. Machine uses the counters to determine voltages for certain assy. If you clear the counter and not replace the parts the machine adjust voltages for the drum and developer assuming it new when in reality it is old.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Jan 31, 2013 | Minolta bizhub 180 Black and White Copier

1 Answer

Minolta bizhub 164 black and white, change drum


Remove the imaging unit from the copier. Unscrew the sides. Remove the old drum. Replace with the new one. Clean the blade and everything of imaging unit including the waste or recycle part.

Jan 23, 2012 | Minolta bizhub 350 Black and White Copier

1 Answer

How do I change the PC Drum on a Bizhub 200?


Recommended that allow only KonicaMinolta tech do it, you must replace the developer, drum cleaning blade, Developing unit and run the required F8. AND THE COUNTERS MUST BE CLEARED FIRST BEFORE REMOVING OLD UNIT.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Oct 21, 2011 | Minolta bizhub 200 All-In-One Printer

1 Answer

Hi my bizhub Di3510f copier is making copies and printing with like one vertical black thin line and like lighter grey lines all over the paper. The papers are eligible but it looks like the page is...


Sounds like your cleaning blade & drum. First try to clean the glass(small ruler size & large one) and if that doesn't work you will need to replace the drum & blade.

Sep 02, 2011 | Minolta Di3510f Bizhub Copier

1 Answer

How to increase the drum life of Konica bizhub c250


Forever to change the OPC drum and drum cleaning blade change the reset fuser(0,80A fast fuser).and the copier machine it work 60000 copies.

Sep 27, 2009 | Konica Minolta Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...