20 Most Recent Konica Minolta Magicolor 4690MF Multifunction Laser Printer Questions & Answers


replace the Yellow magenta and cyan image units

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Apr 01, 2018


check the code because not in the service manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Mar 04, 2018


Here is your error code

Code 0F54 Description Toner level sensor /C malfunction
• An error occurs on the toner level sensor board (TLSB). Remedy 1 Check the cable and connector for proper connection and correct as necessary. 2 Change TLSB. 3 Change PRCB.

Konica Minolta... | Answered on Jan 24, 2018


empty the old one

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2017


replace the image units associated with the color of the streaks

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 06, 2017


What will the machine not do could not find that code

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Mar 11, 2017


If it physically doesn't go through, try to push a heavy stock card or decent thick laminated paper and try to feed it through. There maybe a mylar (plastic sheet) flipped backwards or a piece of debree stuck in paper path of your Document Feeder. This may resolve 80% of issue.
The rest could be broken sensor flag (actuator) or dirty sensor that is not reading the paper passage (or it the sensor is faulty all together)
The amount of staples, paper clips, Bluetag and other junk I pulled from ADF over the years..Bucket loads :)
Good luck.

Konica Minolta... | Answered on Oct 01, 2016


check the sensor might be dirty

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jul 09, 2016


yes what about it

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jul 04, 2016


replace all image unit not using third party also check control panel settinigs for printer might be default to gray scale

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jul 04, 2016


as before check the network setting correct ip address cabling usb?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 25, 2016


I would recheck the network setting first why where they changed???

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 25, 2016


then install a new one USE OEM not third party

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


install the toner as required

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 18, 2016


WOW. now that is a LEGACY Minolta Machine, Konica Minolta web site does not even list that machine try this site for a service manual

Service manuals electronic components datasheets and equipment schematics...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 18, 2016


replace the black image unit and are you using third party toner if so get OEM

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 16, 2016


replace the image unit for yellow and magenta

try this site for parts as a start

Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Dec 30, 2015

Not finding what you are looking for?
Konica Minolta Magicolor 4690MF Multifunction Laser Printer Logo

103 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6763 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magicolor Konica Minolta

  • Magicolor Konica Minolta

Most Popular Question

konica minolta 4690mf paper jams in adf

  • Office Equipment & Supplies
Loading...