Cars & Trucks - Page 3 - Recent Questions, Troubleshooting & Support


This is where it is on a
1.9 tdi 110 from a 2002 seat leon .. which may help you ... or maybe not ...
capture-4lyjgqf3540k1ugelwzyc5av-4-0.png

Seat Cars &... | Answered 3 hours ago


My Mazda 6 2006 model jerks and goes off then refuses to start. What could be the cause?

2004 Mazda 6 | Answered 3 hours ago


the answer to your question should be in your owners manual, just look for the radio that is in your vehicle and follow the directions.

2005 Ford Falcon... | Answered 3 hours ago


The dealer needs to take out the radio, get the model and serial #'s and call to get the unlock code you may need to bring the title or a copy of the title application to prove ownership before they will do anything for you. If they sold the car new they may be able to get it from the file of the original owner.

Peugeot Cars &... | Answered 3 hours ago


Keyless entry systems on Ford vehicles allow you to control a number of different security and convenience features. With your Securilock system, you can unlock your doors without fumbling with your keys, sound the panic alarm in a dark street or parking lot and pop the trunk with your hands full. You can set or reset the remotes from your driver's seat in a few easy minutes with no professional equipment or experience.
Enter your vehicle with your ignition key and remote and insert your key into the ignition.
Turn the ignition key from "Off" to "Run" eight times in the first 10 seconds, and end the eighth turn in the "Run" position.
Wait for the locks to click after the eighth cycle and press and hold any button on your remote within 30 seconds.
Hold the button for up to 30 seconds until the locks automatically click again, and this will indicate successful reprogramming. You can then remove the key from the ignition to end the process.

2004 Ford Escape | Answered 3 hours ago


the solenoid activates when grounded due to pressure sensor readings. Ive seen a lot of cars come to me with VACUUM LEAKS causing the pressure sensor not to activate the solenoid. CK VACUUM LINES!

2011 Chevrolet... | Answered 3 hours ago


V grooved small pry bar on plastic grommets 12 yrs Honda on repair at doorline

Cars & Trucks | Answered 3 hours ago


Simply go on line and see if it's the same part from Auto part stores

Cars & Trucks | Answered 3 hours ago


sometimes the marks are dots on the block itself.

Cars & Trucks | Answered 4 hours ago


sorry i do not have ESP torque settings is not a question, so i do not know what you are looking for or the year because every bolt in the vehicle has a torque setting and they could all be different. Maybe a Chevy dealer could help you.

Chevrolet Spark... | Answered 4 hours ago


will need to know what particular bolt you are talking about and the vehicle details

Cars & Trucks | Answered 4 hours ago


Contact local AutoZone or other reputable parts supply store and request definition of code p1399 and recieve info. on price and availabillity of failing part.This code from what you have described is very important to resolve.Hope this helps you.

Toyota Cars &... | Answered 5 hours ago


To be able to replace the bybass hose on the water pump, you must first make room to gain access to the hose clamps that attach to the water pump. To make room you must first remove the fan clutch, fan and fan shroud all of them simultaneously.
To do that, start by loosening the tensioner roller with a rathcet and removing the serpentine belt. Then loosen the fan cluthc nut using a 32 mm spaner and loosen the bolts of the fan shroud. Then pull the three things upwards (fan shroud, fan, and fan clutch).

1997 Jeep Grand... | Answered 5 hours ago


If the alarm goes off, it its because it was armed in the first place. You mist disarm it before entering the vehicle. To disarm it push the remote control unlock button or open eithe front door or liftgate using the key in the keylock.

1999 Jeep Grand... | Answered 5 hours ago


Hi, the Jeep Grand Cherokee 1997 has a security system called VTSS (Vehicle Theft Security System). The VTSS cannot be disabled as it comes factory installed. What you can do is prevent the VTSS alarm from arming. If you prevent it from arming, you will void it activating. One of the VTSS funcions is to also prevent the engine from starting when the alarm is armed. To disarm the alarm do this. Locate a line colored Violet with a black trace in the Body control module connector. In a suitable place of that line, insert a needle and using a jumper wire touch that needle with an extreme while the other extreme is touching ground. This will disarm the VTSS alarm. When the VTSS is disarmed, the engine will start every time you need it to.

1997 Jeep Grand... | Answered 5 hours ago


It is a GM transmission unlike the 2005 model which is a Ford. The 2012 model is Chinese.
Volvo's Maintenance programme; We are only required/suggested to replace Transmission fluid @ 52.5K Only on vehicles used for towing. Other than that we never really touch it, hell I never really check much. If it isn't leaking than where would it go? Most of the 2000 and up models don't even have a drain plug. By Volvo we have to take the pan itself off to "drain" it! I don't believe there is a filter either, Ive never heard of one.

Cars & Trucks | Answered 5 hours ago

Not finding what you are looking for?
Cars & Trucks Logo

2,131,282 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

83850 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

john h

Level 3 Expert

19466 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...